BS 449 Bolt Loading Capacities — Grade 4.6

BS 449 working loading capacities for grade 4.6 bolts, M 1.6 to M 68 — tension capacity at 120 N/mm 2, shear at 80 N/mm 2, and bearing capacity at a bolt bearing strength of 250 N/mm 2 (ply 250 N/mm 2), with end distance at least 2d.

Last updated: 2026-11

BS 449 Bolt Loading Capacities — Grade 4.6 — engineering reference
Illustrative image redrawn from real product references — not a photograph of stocked items.

Reference data

This page tabulates working loading capacities for grade 4.6 bolts in the BS 449 (structural steelwork) tradition: for every nominal diameter from M 1.6 to M 68 it gives the tensile capacity on the shank and on the threaded portion at 120 N/mm 2, the single- and double-shear capacity at 80 N/mm 2, and the bearing capacity of the bolt for ply thicknesses from 5 mm to 25 mm at a bolt bearing strength of 250 N/mm 2 against a ply bearing strength of 250 N/mm 2 — all conditional on an end distance of at least 2d (twice the bolt diameter). The capacity ladder is a design reference, not a dimensional table: the same geometry appears in five grades on this site (4.6, 6.8, 8.8, 10.9, 12.9), each with its own stress assumptions, so match the page to the grade your connection specifies. Tension capacities split shank vs threads because the threaded portion's reduced effective area governs; shear doubles from single to double plane at the same stress. Head dimensions, lengths, threads and finishes are not tabulated here — per RFQ against the bolt's dimensional standard.

Standard BS 449 loading-capacity table, Bolt Grade = 4.6 — capacities at the printed stress assumptions
Grade 4.6
Diameter range M 1.6 to M 68, 29 nominal diameters (preferred sizes parenthesised in the table, e.g. (M 14), (M 27))
Tension capacity Shank kN and Threads kN at 120 N/mm 2
Shear capacity Single kN and Double kN at 80 N/mm 2
Bearing capacity Bolt bearing strength 250 N/mm 2; ply bearing strength 250 N/mm 2; for end distance >= 2d
Ply thickness grid Bearing capacity in kN for ply thicknesses 5, 6, 7, 8, 9, 10, 12.5, 15, 20 and 25 mm
Not tabulated Head dimensions, lengths, thread classes, finishes, materials — per RFQ
BS 449 bolt grade 4.6 - loading capacities per nominal diameter (M 1.6 - M 68), bearing capacity by ply thicknessColumn groups as printed on the collected page, carried verbatim: "Tension Capacity @ 120 N/mm 2" (Shank / Threads kN), "Shear Capacity @ 80 N/mm 2" (Single / Double kN), "Bolt Grade = 4.6", "Bearing Capacity of Bolts in kN for End Distance >= 2d Bolt Bearing Strength = 250 N/mm 2 Ply Bearing Strength: = 250 N/mm 2" over "Bearing (Ply) Thickness Passed Through, mm" (the 5-25 mm columns). Parenthesised diameters, e.g. (M 14), are the source's own marking - carried verbatim. Verification: re-fetched from the live page 2026-11-01, all 29 data rows x 16 cells cell-for-cell equal to the x127 corpus.
Dia. mmTensile Area mm 2Shank kNThreads kNSingle kNDouble kN5 mm6 mm7 mm8 mm9 mm10 mm12.5 mm15 mm20 mm25 mm
M 1.61.270.2410.1520.1610.3222.02.42.83.23.64.05.06.08.010.0
M 22.070.3770.2480.2510.5022.53.03.54.04.55.06.37.510.012.5
M 2.53.390.5890.4070.3930.7863.13.84.45.05.66.37.89.412.515.6
M 35.030.8480.6040.5651.133.84.55.36.06.87.59.411.315.018.8
M 48.781.511.051.012.025.06.07.08.09.010.012.515.020.025.0
M 514.22.361.71.573.146.37.58.810.011.312.515.618.825.031.3
M 620.13.392.412.264.527.59.010.512.013.515.018.822.530.037.5
M 836.66.034.394.028.0410.012.014.016.018.020.025.030.040.050.0
M 10589.426.966.2812.5612.515.017.520.022.525.031.337.550.062.5
M 1284.313.610.19.0518.115.018.021.024.027.030.037.545.060.075.0
(M 14)11518.513.812.324.617.521.024.528.031.535.043.852.570.087.5
M 1615724.118.816.132.220.024.028.032.036.040.050.060.080.0100.0
(M 18)19230.52320.440.822.527.031.536.040.545.056.367.590.0112.5
M 2024537.729.425.150.225.030.035.040.045.050.062.575.0100.0125.0
(M 22)30345.636.430.460.827.533.038.544.049.555.068.882.5110.0137.5
M 2435354.342.436.272.430.036.042.048.054.060.075.090.0120.0150.0
(M 27)45968.755.145.891.633.840.547.354.060.867.584.4101.3135.0168.8
M 3056184.867.356.511337.545.052.560.067.575.093.8112.5150.0187.5
(M 33)694102.683.368.4136.841.349.557.866.074.382.5103.1123.8165.0206.3
M 36817122.19881.4162.845.054.063.072.081.090.0112.5135.0180.0225.0
(M 39)976143.4117.195.6191.248.858.568.378.087.897.5121.9146.3195.0243.8
M 421120166.3134.4110.8221.652.563.073.584.094.5105.0131.3157.5210.0262.5
(M 45)1300190.9156127.2254.456.367.578.890.0101.3112.5140.6168.8225.0281.3
M 481470217.1176.4144.8289.660.072.084.096.0108.0120.0150.0180.0240.0300.0
(M 52)1760254.8211.2169.9339.865.078.091.0104.0117.0130.0162.5195.0260.0325.0
M 562030295.6243.619739470.084.098.0112.0126.0140.0175.0210.0280.0350.0
(M 60)2360339.3283.2226.2452.475.090.0105.0120.0135.0150.0187.5225.0300.0375.0
M 642680386321.6257.4514.880.096.0112.0128.0144.0160.0200.0240.0320.0400.0
(M 68)3060435.8367.2290.558185.0102.0119.0136.0153.0170.0212.5255.0340.0425.0

How to use it

  • Material and finish specified per RFQ against the dimensional standard of the bolt you are buying (hex bolt, stud or socket product). Grade 4.6 capacity values assume the printed stresses; if your connection design uses different ply strengths, end distances below 2d, or a different code basis, the table values do not transfer — send the joint stack-up (ply thicknesses, hole type, end distance) and grade with the RFQ so the capacities can be quoted against the actual geometry

These figures are engineering reference data, not a stocked-range claim. Parts manufactured or sourced to the standards named here are quoted on request — send an RFQ with your sizes, grades and quantities and the quote carries the confirmed schedule and documents.

Frequently asked questions

How do I read the grade 4.6 loading-capacity table for a real joint?

Pick the row for the bolt diameter, then read three numbers. Tension: use the Threads kN column if the shear plane or the grip puts threads in the stressed section, the higher Shank kN value only where the full-diameter shank carries the load. Shear: Single kN for one shear plane, Double kN for two — the double value is exactly twice the single at the same stress. Bearing: take the ply thickness actually passed through (the thinnest ply, if several) and read kN across the 5–25 mm columns; the grid already assumes end distance of at least 2d and a ply bearing strength of 250 N/mm 2. The connection's allowable load is the smallest of the three — tension, shear or bearing — and combined tension-plus-shear needs an interaction check against the governing code, which this table alone does not cover.

Why are there five separate BS 449 capacity pages instead of one table?

Because the grade is the load-bearing assumption: each page tabulates the same 29 diameters but at that grade's own stress values — tension from 120 N/mm 2 at grade 4.6 up to 420 N/mm 2 at grade 12.9, shear and bolt bearing strength rising with it, while the ply bearing strength stays 250 N/mm 2 across all five. Reading a grade 8.8 joint from the grade 4.6 page would understate capacity by more than half; the reverse would overstate it. Choose the page matching the property grade marked on the bolts you order (ISO 898-1 classes use the same numbering), then quote lengths, heads and finish per RFQ — this table series carries capacities only, no dimensions.