Threaded Rods & Lead-Screw Threads
Headless fully threaded rods and studs (DIN 975 / DIN 976-1, ASME B18.31.2) plus metric trapezoidal thread forms (DIN 103) for suspension systems, flange bolting and linear power transmission.
Product family
Threaded Rods & Studs
Headless fully threaded rods and studs used with nuts on both ends — DIN 975 / DIN 976-1 metric rods (M2–M64) and ASME B18.31.2 continuous-thread, double-end an
View specifications →
Product family
Trapezoidal Thread Rods & Nuts
DIN 103 metric trapezoidal (Tr) thread rods and mating nuts for linear power transmission — Tr10–Tr60 rod series with matched pitch per size, nuts TR10–TR40, to
View specifications →Full-thread rods and trapezoidal threads as motion and fixing elements
Headless fully threaded rods and studs per DIN 975 / DIN 976-1 and ASME B18.31.2 are the general-purpose linears of the fastener world: suspended services, adjustable mountings, and long bolted connections where clamping over a length matters. Specifying them well is mostly about three coupled choices — property class, coating and thread length per end — because coating thickness changes the nut fit, and long rods in higher classes are made to order rather than cut from stock. Stating the intended nuts and washers with the rod keeps the thread pair consistent, and for lengths beyond stock bars, the inquiry should name the cut tolerance and end-treatment you can accept.
The trapezoidal-thread families (with the matching DIN 103-style trapezoidal rods and nuts) serve a different purpose entirely: converting rotation into controlled linear motion in spindles, valves, presses and tooling. Here the lead, the flank form and the nut material (bronze against steel is the classical low-friction pairing) dominate the quote, together with the decision between single- and multi-start forms, because multi-start threads trade self-locking behaviour for travel per turn. Tell us the load to be carried, the stroke, and whether the spindle must hold position unpowered — the self-locking question — and we can propose a thread form and nut pairing with realistic wear life rather than a nominal diameter alone.
Quality assurance & delivery terms
Full batch traceability from raw material to finished product. Every shipment leaves with documented inspection results, so what you approve in sampling is what arrives in production.
Certifications
- ISO 9001:2015
- RoHS
- REACH
Documents with every order
- Mill Test Certificate (MTC)
- Dimensional Report
- Salt Spray Test Report
Typical lead times
- Standard samples: 3-5 Days
- Bulk standard parts: 15-25 Days
- Custom OEM parts: 30-45 Days
Manufacturing base
- 5000 m² facility, 8 production lines
- 50-100 employees
- Monthly output 80-120 Tons
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your Threaded Rods & Lead-Screw Threads inquiry
- ✓ Standard and property class (e.g. DIN 912, ISO 4762, class 8.8) for the Threaded Rods & Lead-Screw Threads — or a drawing for custom parts.
- ✓ Sizes, lengths and thread type (metric or inch).
- ✓ Quantity per size and your target delivery date.
- ✓ Destination country, plus any coating or finish requirement for the Threaded Rods & Lead-Screw Threads.
- ✓ Any documents you need with the shipment of the Threaded Rods & Lead-Screw Threads (e.g. mill test certificate) so the quote includes them.
- ✓ Your inquiry goes straight to the factory team by email and gets a reply within 24 hours.
- ✓ Factory-direct pricing for your Threaded Rods & Lead-Screw Threads
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support