Trapezoidal Thread Rods & Nuts

DIN 103 metric trapezoidal (Tr) thread rods and mating nuts for linear power transmission — Tr10–Tr60 rod series with matched pitch per size, nuts TR10–TR40, tolerance class 7e, in steel 1.0401 (C15) or stainless 1.4301/1.4305. Standard thread forms are self-locking.

Last updated: 2026-11

Request a Quote

Trapezoidal Thread Rods & Nuts in an industrial setting
Illustrative image redrawn from real product references — not a photograph of stocked items.

Specifications

Industry-standard reference ranges — availability confirmed per quotation; not a stocked-range claim.

size series Tr10–Tr60 (DIN 103 rods: Tr10, Tr12, Tr14, Tr16, Tr18, Tr20, Tr22, Tr24, Tr26, Tr28, Tr30, Tr36, Tr40, Tr44, Tr50, Tr60) | Nuts TR10–TR40
pitch Tr10/Tr12 ×3 mm · Tr14–Tr20 ×4 mm · Tr22–Tr28 ×5 mm · Tr30/Tr36 ×6 mm · Tr40/Tr44 ×7 mm · Tr50 ×8 mm · Tr60 ×9 mm
nut dimensions DIN 103 hex nut across-flats s: 17 (TR10) to 65 (TR40); height h: 15 (TR10) to 60 (TR40)
thread tolerance Tolerance class 7e

Materials

  • steel 1.0401 (C15)
  • stainless steel 1.4301 / 1.4305

Engineering guidance

Tr threads move loads; they do not clamp them. The family decision is mechanical: which Tr size and pitch delivers the travel and self-locking the mechanism needs, in a material that survives the duty cycle, at the tolerance class the application can afford.

A transmission thread, self-locking by form

The trapezoidal profile (DIN 103, the ISO Tr series) is a transmission thread: the collected manufacturer data describes the trapezoidal thread spindle as a transmission thread with relatively high friction whose standard thread forms are self-locking — the practical advantage being that the spindle generally does not need to be secured in the rest position. High friction is the point, not a defect: it is what converts rotation into held linear position. That is the opposite trade from ISO metric clamping threads, which are optimized for preload against a nut rather than for wear against one.

This is why Tr rods pair with matched nuts (TR-series) of the same nominal size, pitch and thread starts: the pair wears as a system. Sizing usually starts from the required load and travel speed, then checks the self-locking margin rather than assuming it.

Size series and matched nuts (DIN 103)

The collected rod sheets run the DIN 103 series Tr10–Tr60: pitch grows with diameter — 3 mm at Tr10/Tr12, 4 mm at Tr14–Tr20, 5 mm at Tr22–Tr28, 6 mm at Tr30/Tr36, 7 mm at Tr40/Tr44, 8 mm at Tr50 and 9 mm at Tr60. The nut sheets publish the TR10–TR40 hex-nut dimensions on the same pitch ladder (across-flats 17 mm at TR10 rising to 65 mm at TR40, height 15 mm to 60 mm), so rod and nut are quoted as a pair, never separately.

Ends arrive sawed with excess and not deburred — plan end machining to the bearing or drive interface as part of the build, not as a delivered feature.

Precision class and material

The collected spindle data runs tolerance class 7e with pitch precision 0.3/300 mm, rolled and bright — the rolled process giving the thread its strength. Stainless is available rolled up to Tr 40x7 and whirled above that size, which matters when a long stainless spindle cannot be rolled. Materials on the collected sheet are steel 1.0401 (C15) or stainless steel 1.4301 (whirled spindles in 1.4305).

What this page cannot verify: nut material beyond the DIN 103 dimension sheets (which publish dimensions without a material attribution) — nut material is confirmed at quotation against the application, since bronze and polymer nut types exist alongside matched steel for wear and friction tuning. Verify the pitch precision figure against the application's positioning budget before assuming class 7e is sufficient.

Ordering & documentation

Documents

Shipments of Trapezoidal Thread Rods & Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for this trapezoidal thread rods & nuts line follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • Tr nominal diameter, pitch/lead, thread hand and required tolerance class.
  • Rod and nut material, heat treatment and surface condition.
  • Nut engagement, axial load, travel speed, lubrication and duty cycle.
  • Length, end machining, quantity and drawing or standard reference.

Sample & supply

Minimum order quantities and lead times for trapezoidal thread rods & nuts are confirmed at quotation — send Tr size and pitch, length, tolerance class and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

Trapezoidal Thread Rods & Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store these trapezoidal thread rods & nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why choose a trapezoidal thread instead of a standard metric thread for a lead screw?

The Tr profile is built for power transmission: the collected manufacturer data describes the trapezoidal thread spindle as a transmission thread with relatively high friction whose standard thread forms are self-locking, so position is held without a separate brake in the rest position. ISO metric threads are optimized for clamping, not for wearing against a nut under repeated linear travel.

What precision comes with a Tr spindle?

The collected spindle data runs tolerance class 7e with pitch precision 0.3/300 mm, rolled and bright, with stainless available rolled up to Tr 40x7 and whirled above that. Ends arrive sawed with excess and not deburred — plan for end machining to the bearing or drive interface.

Which materials are standard for Tr rods and nuts?

The collected spindle sheet lists steel 1.0401 (C15) or stainless steel 1.4301 (whirled spindles stainless 1.4305); the collected DIN 103 rod and nut sheets publish the Tr10–Tr60 size series and the TR10–TR40 nut dimensions without a material attribution, so nut material is confirmed at quotation against your application (matched steel, or bronze/polymer nut types where the drawing calls for them).

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Trapezoidal Thread Rods & Nuts inquiry

  • ✓ Give the Tr nominal diameter, pitch/lead, thread hand and required tolerance class.
  • ✓ Identify rod and nut material, heat treatment and surface condition.
  • ✓ State nut engagement, axial load, travel speed, lubrication and duty cycle.
  • ✓ Provide length, end machining, quantity and drawing or standard reference.
  • ✓ Factory-direct pricing for your Trapezoidal Thread Rods & Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.