DIN 472 Internal Retaining Rings (for Bores)
Metric internal retaining rings to DIN 472 — thin, circular stamped circlips assembled axially into a groove machined inside a housing or bore, with a tapered section design for uniform circular deformation, in A2 stainless steel, nominal bore diameters sampled from 9 mm to 290 mm in the collected table (table spans d1 = 8–300 mm).
Last updated: 2026-11
Specifications
DIN 472 internal retaining rings (aka circlips) are thin, circular metal stampings assembled axially into machined grooves in housings and bores. They reduce vibration and hold parts in position while permitting easy disassembly, and the tapered section design allows uniform circular deformation and even contact with the groove surface. The collected specification sheet attributes A2 stainless steel to the rings and notes that DIN 472 has no ISO equivalent, so the DIN designation remains the ordering vocabulary. The sheet's dimension table spans nominal bore diameters d1 = 8 through 300 mm; the rows below are quoted verbatim at named sizes, each with groove diameter d2 and groove width m plus the sheet's supplementary load columns, which are quoted as whole rows because the extracted layout does not support per-cell attribution.
| Standard | DIN 472 — internal retaining rings for bores (the collected sheet notes DIN 472 has no ISO equivalent) |
|---|---|
| Nominal diameter range (table) | d1 = 8 through 300 mm (table extent as printed; see sampled rows) |
| Sampled row, d1 = 9 | s 0.8 | d3 9.8 | a 2.5 | b 1.3 | d5 1 | weight 0.15 kg/1000pcs | groove d2 9.4 | groove width at this size per the sheet's printed row: 0.11 — see the FAQ on smallest-size column layout (full row: | ring d1 9 | 0.8 | 9.8 | 2.5 | 1.3 | 1 | 0.15 | 9.4 | 0.11 | 0.9 | 0.2 | 0.6 | 3.7 | 0.96 | 2 | 1 | 1.5 |) |
| Sampled row, d1 = 40 | s 1.8 | d3 43.5 | a 5.8 | b 3.9 | d5 2.5 | weight 4.7 kg/1000pcs | groove d2 42.5 | m 1.9 | n 1.3 | d4 3.8 |
| Sampled row, d1 = 100 | s 3 | d3 106 | a 9.2 | b 8.4 | d5 3.5 | weight 38 kg/1000pcs | groove d2 104 | m 3.2 | n 1.8 | d4 5.3 (full row: | ring d1 100 | 3 | 106 | 9.2 | 8.4 | 3.5 | 38 | 104 | 3.2 | 1.8 | 5.3 | 80.6 | 93.1 | 188 | 3 | 31 |) |
| Sampled row, d1 = 290 | s 5 | d3 305 | a 16.2 | b 16 | d5 5 | weight 415 kg/1000pcs | groove d2 298 | m 5.2 | n 4 | d4 12 (full row: | ring d1 290 | 5 | 305 | 16.2 | 16 | 5 | 415 | 298 | 5.2 | 4 | 12 | 256 | 615 | 482 | 4 | 72 |) |
| Groove diameter tolerance | Band markers (H11) / (H12) / (H13) printed per size in the sheet's d2 groove column |
| Installation | Axial assembly into a machined groove inside the housing bore; the sheet also lists the nominal size of pliers per DIN 5254 per size band |
| Load data | The sheet tabulates supplementary load columns (FN, FR, FRg, nabl) per size; the extracted layout does not support per-cell attribution, so these are quoted as whole rows on request rather than rendered as labeled figures |
| MOQ / lead time | Not owner-confirmed for this family — confirmed at quotation |
| Part Number | Bore (B) mm | Thickness t (mm) | t Tol. (mm) | Free Dia. D (mm) | D Tol. (mm) | C | C1 | L (max) | b ~ | h (min) | Groove Dia. G (mm) | G Tol. (mm) | Groove Width W (mm) | W Tol. (mm) | n (min) | d ~ | Wt. kg/1000 (unheaded col) | Tc (N) | Tg (N) | Circlip Plier No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D1300-8 | 8 | 0.80 | 8.7 | 2.8 | 3.6 | 2.4 | 1.1 | 1.0 | 8.4 | 0.09 | 0.90 | 0.6 | 0.20 | 0.11 | 6200 | 620 | ||||
| D1300-9 | 9 | 0.80 | 9.8 | 3.5 | 4.4 | 2.5 | 1.3 | 1.0 | 9.4 | 0.00 | 0.90 | 0.6 | 0.20 | 0.17 | 7000 | 690 | ||||
| D1300-9.5 | 9.5 | 1.00 | 10.3 | 3.5 | 3.9 | 3.0 | 1.4 | 1.2 | 9.9 | 1.10 | 0.6 | 0.20 | 0.22 | 9300 | 730 | HC 1 | ||||
| D1300-10 | 10 | 1.00 | 10.8 | 3.1 | 4.0 | 3.2 | 1.4 | 1.2 | 10.4 | 1.10 | 0.6 | 0.20 | 0.24 | 9700 | 770 | or | ||||
| D1300-11 | 11 | 1.00 | 11.8 | 0.36 | 3.9 | 4.8 | 3.3 | 1.5 | 1.2 | 11.4 | 1.10 | 0.6 | 0.20 | 0.30 | 10700 | 840 | HD 1 | |||
| D1300-12 | 12 | 1.00 | 13.0 | -0.18 | 4.7 | 5.7 | 3.4 | 1.7 | 1.5 | 12.5 | 1.10 | 0.8 | 0.30 | 0.34 | 11700 | 1150 | ||||
| D1300-13 | 13 | 1.00 | 14.1 | 5.3 | 6.4 | 3.6 | 1.8 | 1.5 | 13.6 | 0.11 | 1.10 | 0.9 | 0.30 | 0.39 | 12700 | 1500 | ||||
| D1300-14 | 14 | 1.00 | 15.1 | 6.0 | 7.2 | 3.7 | 1.9 | 1.7 | 14.6 | 0.00 | 1.10 | 0.9 | 0.30 | 0.45 | 13600 | 1620 | ||||
| D1300-15 | 15 | 1.00 | 16.2 | 7.0 | 8.3 | 3.7 | 2.0 | 1.7 | 15.7 | 1.10 | 1.1 | 0.40 | 0.48 | 14600 | 2030 | |||||
| D1300-16 | 16 | 1.00 | 17.3 | 7.7 | 9.2 | 3.8 | 2.0 | 1.7 | 16.8 | 1.10 | 1.2 | 0.40 | 0.54 | 15600 | 2470 | |||||
| D1300-17 | 17 | 1.00 | 18.3 | 8.4 | 10.0 | 3.9 | 2.1 | 1.7 | 17.8 | 1.10 | 1.2 | 0.40 | 0.59 | 16600 | 2620 | |||||
| D1300-18 | 18 | 1.00 | 19.5 | 8.9 | 10.8 | 4.1 | 2.2 | 2.0 | 19.0 | 1.10 | 1.5 | 0.50 | 0.61 | 17500 | 3490 | |||||
| D1300-19 | 19 | 1.00 | 20.5 | 9.8 | 11.8 | 4.1 | 2.2 | 2.0 | 20.0 | 1.10 | 1.5 | 0.50 | 0.72 | 18500 | 3680 | |||||
| D1300-20 | 20 | 1.00 | 21.5 | 10.6 | 12.6 | 4.2 | 2.3 | 2.0 | 21.0 | 1.10 | 1.5 | 0.50 | 0.75 | 19500 | 3860 | |||||
| D1300-21 | 21 | 1.00 | 22.5 | 0.42 | 11.6 | 13.6 | 4.2 | 2.4 | 2.0 | 22.0 | 1.10 | 1.5 | 0.50 | 0.84 | 20400 | 4050 | ||||
| D1300-22 | 22 | 1.00 | 23.5 | -0.21 | 12.6 | 14.6 | 4.2 | 2.5 | 2.0 | 23.0 | 1.10 | 1.5 | 0.50 | 0.86 | 21400 | 4240 | ||||
| D1300-23 | 23 | 1.20 | 24.6 | 13.6 | 15.7 | 4.2 | 2.5 | 2.0 | 24.1 | 0.21 | 1.30 | 1.7 | 0.60 | 1.20 | 26900 | 4880 | ||||
| D1300-24 | 24 | 1.20 | 25.9 | 14.2 | 16.4 | 4.4 | 2.6 | 2.0 | 25.2 | 0.00 | 1.30 | 1.8 | 0.60 | 1.21 | 28000 | 5560 | ||||
| D1300-25 | 25 | 1.20 | 26.9 | 15.0 | 17.2 | 4.5 | 2.7 | 2.0 | 26.2 | 1.30 | 1.8 | 0.60 | 1.33 | 29200 | 5790 | |||||
| D1300-26 | 26 | 1.20 | 27.9 | 15.6 | 17.8 | 4.7 | 2.8 | 2.0 | 27.2 | 1.30 | 1.8 | 0.60 | 1.35 | 30400 | 6020 | |||||
| D1300-27 | 27 | 1.20 | 29.1 | 16.6 | 19.0 | 4.7 | 2.9 | 2.0 | 28.4 | 1.30 | 2.1 | 0.70 | 1.55 | 31600 | 7310 | |||||
| D1300-28 | 28 | 1.20 | 30.1 | 17.4 | 19.8 | 4.8 | 2.9 | 2.0 | 29.4 | 1.30 | 2.1 | 0.70 | 1.64 | 32700 | 7570 | |||||
| D1300-29 | 29 | 1.20 | 31.1 | 18.4 | 20.8 | 4.8 | 3.0 | 2.0 | 30.4 | 1.30 | 2.1 | 0.70 | 1.74 | 33900 | 7840 | HC 2 | ||||
| D1300-30 | 30 | 1.20 | 0.00 | 32.1 | 19.4 | 21.8 | 4.8 | 3.0 | 2.0 | 31.4 | 1.30 | 2.1 | 0.70 | 1.87 | 35100 | 8100 | or | |||
| D1300-31 | 31 | 1.20 | -0.06 | 33.4 | 19.6 | 22.3 | 5.2 | 3.2 | 2.5 | 32.7 | 1.30 | 2.6 | 0.90 | 2.20 | 36250 | 9900 | HD 2 | |||
| D1300-32 | 32 | 1.20 | 34.4 | 0.5 | 20.2 | 22.9 | 5.2 | 3.2 | 2.5 | 33.7 | 1.30 | 2.6 | 0.90 | 1.98 | 37400 | 10500 | ||||
| D1300-33 | 33 | 1.20 | 35.5 | -0.25 | 21.2 | 23.9 | 5.4 | 3.3 | 2.5 | 34.7 | 1.30 | 2.6 | 0.90 | 2.13 | 38600 | 10900 | ||||
| D1300-34 | 34 | 1.50 | 36.5 | 22.2 | 24.9 | 5.4 | 3.3 | 2.5 | 35.7 | 1.60 | 2.6 | 0.90 | 2.88 | 49700 | 11200 | |||||
| D1300-35 | 35 | 1.50 | 37.8 | 23.2 | 26.2 | 5.4 | 3.4 | 2.5 | 37.0 | 1.60 | 0.14 | 3.0 | 1.00 | 2.93 | 51100 | 13600 | ||||
| D1300-36 | 36 | 1.50 | 38.8 | 24.2 | 27.2 | 5.4 | 4.0 | 2.5 | 38.0 | 0.25 | 1.60 | 0 | 3.0 | 1.00 | 3.23 | 52600 | 14000 | |||
| D1300-37 | 37 | 1.50 | 39.8 | 25.0 | 28.0 | 5.5 | 3.2 | 2.5 | 39.0 | 0.00 | 1.60 | 3.0 | 1.00 | 2.98 | 54100 | 14300 | ||||
| D1300-38 | 38 | 1.50 | 40.8 | 26.0 | 29.0 | 5.5 | 3.7 | 2.5 | 40.0 | 1.60 | 3.0 | 1.00 | 3.54 | 55500 | 14700 | |||||
| D1300-40 | 40 | 1.75 | 43.5 | 27.4 | 30.9 | 5.8 | 3.9 | 2.5 | 42.5 | 1.85 | 3.8 | 1.30 | 4.63 | 56600 | 19400 | |||||
| D1300-41 | 41 | 1.75 | 44.5 | 0.9 | 28.2 | 31.7 | 5.9 | 4.0 | 2.5 | 43.5 | 1.85 | 3.8 | 1.30 | 5.37 | 58100 | 19900 | ||||
| D1300-42 | 42 | 1.75 | 45.5 | -0.39 | 29.2 | 32.7 | 5.9 | 4.1 | 2.5 | 44.5 | 1.85 | 3.8 | 1.30 | 5.21 | 59500 | 20400 | ||||
| D1300-45 | 45 | 1.75 | 48.5 | 31.6 | 35.1 | 6.2 | 4.3 | 2.5 | 47.5 | 1.85 | 3.8 | 1.30 | 5.88 | 63700 | 21800 | |||||
| D1300-47 | 47 | 1.75 | 50.5 | 33.2 | 36.7 | 6.4 | 4.4 | 2.5 | 49.5 | 1.85 | 3.8 | 1.30 | 6.13 | 66600 | 22700 | |||||
| D1300-48 | 48 | 1.75 | 51.5 | 34.6 | 37.7 | 6.4 | 4.5 | 2.5 | 50.5 | 1.85 | 3.8 | 1.30 | 6.31 | 68000 | 23200 | |||||
| D1300-50 | 50 | 2.00 | 54.2 | 36.0 | 40.0 | 6.5 | 4.6 | 2.5 | 53.0 | 2.15 | 4.5 | 1.50 | 8.01 | 80900 | 29100 | |||||
| D1300-51 | 51 | 2.00 | 55.2 | 37.0 | 41.0 | 6.5 | 4.7 | 2.5 | 54.0 | 2.15 | 4.5 | 1.50 | 8.72 | 82500 | 29700 | |||||
| D1300-52 | 52 | 2.00 | 56.2 | 37.6 | 41.6 | 6.7 | 4.7 | 2.5 | 55.0 | 2.15 | 4.5 | 1.50 | 8.91 | 84100 | 30300 | |||||
| D1300-55 | 55 | 2.00 | 59.2 | 40.4 | 44.4 | 6.8 | 5.0 | 2.5 | 58.0 | 2.15 | 4.5 | 1.50 | 9.44 | 89000 | 32000 | |||||
| D1300-56 | 56 | 2.00 | 60.2 | 41.4 | 45.4 | 6.8 | 5.1 | 2.5 | 59.0 | 2.15 | 4.5 | 1.50 | 9.75 | 90600 | 32500 | |||||
| D1300-57 | 57 | 2.00 | 62.2 | 42.4 | 46.4 | 6.8 | 5.1 | 2.5 | 60.0 | 2.15 | 4.5 | 1.50 | 10.36 | 92200 | 33100 | |||||
| D1300-58 | 58 | 2.00 | 62.2 | 43.2 | 47.2 | 6.9 | 5.2 | 2.5 | 61.0 | 2.15 | 4.5 | 1.50 | 9.56 | 93900 | 33700 | |||||
| D1300-60 | 60 | 2.00 | 64.2 | 1.1 | 44.4 | 48.4 | 7.3 | 5.4 | 2.5 | 63.0 | 2.15 | 4.5 | 1.50 | 11.15 | 97100 | 34800 | ||||
| D1300-62 | 62 | 2.00 | 66.2 | -0.46 | 46.4 | 50.4 | 7.3 | 5.5 | 2.5 | 65.0 | 0.30 | 2.15 | 4.5 | 1.50 | 11.59 | 100000 | 35900 | |||
| D1300-63 | 63 | 2.00 | 67.2 | 47.4 | 51.4 | 7.3 | 5.6 | 2.5 | 66.0 | 0.00 | 2.15 | 4.5 | 1.50 | 11.78 | 102000 | 36800 | ||||
| D1300-65 | 65 | 2.50 | 69.2 | 48.0 | 52.8 | 7.6 | 5.8 | 3.0 | 68.0 | 2.65 | 4.5 | 1.50 | 16.80 | 131000 | 37600 | |||||
| D1300-67 | 67 | 2.50 | 72.0 | 50.6 | 54.6 | 7.7 | 6.0 | 3.0 | 70.0 | 2.65 | 4.5 | 1.50 | 17.71 | 136000 | 38700 | |||||
| D1300-68 | 68 | 2.50 | 72.2 | 51.4 | 55.4 | 7.8 | 6.1 | 3.0 | 71.0 | 2.65 | 4.5 | 1.50 | 17.72 | 138000 | 39300 | HA 3 | ||||
| D1300-70 | 70 | 2.50 | 74.5 | 53.4 | 57.4 | 7.8 | 6.2 | 3.0 | 73.0 | 2.65 | 4.5 | 1.50 | 17.65 | 142000 | 40400 | or | ||||
| D1300-72 | 72 | 2.50 | 76.5 | 55.4 | 59.4 | 7.8 | 6.4 | 3.0 | 75.0 | 2.65 | 4.5 | 1.50 | 19.70 | 146000 | 41600 | HB 3 | ||||
| D1300-75 | 75 | 2.50 | 79.5 | 58.4 | 62.4 | 7.8 | 6.6 | 3.0 | 78.0 | 2.65 | 4.5 | 1.50 | 20.62 | 152000 | 43300 | |||||
| D1300-76 | 76 | 2.50 | 80.7 | 59.4 | 63.4 | 7.9 | 6.7 | 3.0 | 79.0 | 2.65 | 4.5 | 1.50 | 22.68 | 154000 | 43800 | |||||
| D1300-78 | 78 | 2.50 | 82.5 | 60.0 | 64.0 | 8.5 | 6.8 | 3.0 | 81.0 | 2.65 | 0.14 | 4.5 | 1.50 | 22.46 | 158000 | 45000 | HC 3 | |||
| D1300-80 | 80 | 2.50 | 0 | 85.5 | 62.0 | 66.5 | 8.5 | 7.0 | 3.0 | 83.5 | 2.65 | 0 | 5.3 | 1.80 | 21.38 | 162000 | 53900 | or | ||
| D1300-82 | 82 | 2.50 | -0.06 | 87.5 | 64.0 | 68.5 | 8.5 | 7.0 | 3.0 | 85.5 | 2.65 | 5.3 | 1.80 | 22.27 | 166000 | 55300 | HD 3 | |||
| D1300-85 | 85 | 3.00 | 90.5 | 66.8 | 71.3 | 8.6 | 7.2 | 3.5 | 88.5 | 3.15 | 5.3 | 1.80 | 31.78 | 206000 | 57200 | |||||
| D1300-88 | 88 | 3.00 | 93.5 | 69.8 | 74.3 | 8.6 | 7.4 | 3.5 | 91.5 | 0.35 | 3.15 | 5.3 | 1.80 | 32.94 | 214000 | 59200 | ||||
| D1300-90 | 90 | 3.00 | 95.5 | 1.3 | 71.8 | 76.3 | 8.6 | 7.6 | 3.5 | 93.5 | 0.00 | 3.15 | 5.3 | 1.80 | 33.35 | 218000 | 60500 | |||
| D1300-92 | 92 | 3.00 | 97.5 | -0.54 | 73.6 | 78.1 | 8.7 | 7.8 | 3.5 | 95.5 | 3.15 | 5.3 | 1.80 | 35.72 | 223000 | 61900 | HC 4 | |||
| D1300-95 | 95 | 3.00 | 100.5 | 76.4 | 80.9 | 8.8 | 8.1 | 3.5 | 98.5 | 3.15 | 5.3 | 1.80 | 38.88 | 231000 | 63800 | or | ||||
| D1300-98 | 98 | 3.00 | 103.5 | 79.0 | 83.5 | 9.0 | 8.3 | 3.5 | 101.5 | 3.15 | 5.3 | 1.80 | 42.16 | 238000 | 65800 | HD 4 | ||||
| D1300-100 | 100 | 3.00 | 105.5 | 81.0 | 85.5 | 9.0 | 8.4 | 3.5 | 103.5 | 3.15 | 5.3 | 1.80 | 43.41 | 243000 | 67100 | |||||
| D1300-102 | 102 | 4.00 | 108.0 | 82.6 | 87.6 | 9.2 | 8.5 | 3.5 | 106.0 | 4.15 | 6.0 | 2.00 | 55.20 | 330000 | 78400 | |||||
| D1300-105 | 105 | 4.00 | 112.0 | 85.6 | 90.6 | 9.2 | 8.7 | 3.5 | 109.0 | 4.15 | 6.0 | 2.00 | 59.20 | 340000 | 80700 | |||||
| D1300-108 | 108 | 4.00 | 115.0 | 88.0 | 93.0 | 9.5 | 8.9 | 3.5 | 112.0 | 0.54 | 4.15 | 6.0 | 2.00 | 62.60 | 350000 | 83000 | ||||
| D1300-110 | 110 | 4.00 | 117.0 | 88.2 | 93.2 | 10.4 | 9.0 | 3.5 | 114.0 | 0.00 | 4.15 | 6.0 | 2.00 | 71.75 | 356000 | 84500 | ||||
| D1300-112 | 112 | 4.00 | 119.0 | 90.0 | 95.0 | 10.5 | 9.1 | 3.5 | 116.0 | 4.15 | 6.0 | 2.00 | 70.68 | 362000 | 86000 | |||||
| D1300-115 | 115 | 4.00 | 122.0 | 93.0 | 98.0 | 10.5 | 9.3 | 3.5 | 119.0 | 4.15 | 6.0 | 2.00 | 73.16 | 372000 | 88200 | |||||
| D1300-120 | 120 | 4.00 | 127.0 | 97.0 | 102.0 | 11.0 | 9.7 | 3.5 | 124.0 | 4.15 | 6.0 | 2.00 | 80.40 | 388000 | 92000 | |||||
| D1300-125 | 125 | 4.00 | 132.0 | 102.0 | 107.0 | 11.0 | 10.0 | 4.0 | 129.0 | 4.15 | 6.0 | 2.00 | 81.20 | 405000 | 95800 | |||||
| D1300-127 | 127 | 4.00 | 135.0 | 104.0 | 109.0 | 11.0 | 10.1 | 4.0 | 131.0 | 4.15 | 6.0 | 2.00 | 80.80 | 411000 | 97300 | |||||
| D1300-130 | 130 | 4.00 | 137.0 | 107.0 | 112.0 | 11.0 | 10.2 | 4.0 | 134.0 | 4.15 | 6.0 | 2.00 | 85.13 | 421000 | 99500 | |||||
| D1300-135 | 135 | 4.00 | 142.0 | 1.5 | 112.0 | 116.0 | 11.2 | 10.5 | 4.0 | 139.0 | 4.15 | 6.0 | 2.00 | 94.79 | 437000 | 103000 | ||||
| D1300-140 | 140 | 4.00 | 147.0 | -0.63 | 117.0 | 121.0 | 11.2 | 10.7 | 4.0 | 144.0 | 0.63 | 4.15 | 6.0 | 2.00 | 98.61 | 453000 | 107000 | |||
| D1300-145 | 145 | 4.00 | 152.0 | 122.0 | 126.0 | 11.4 | 10.9 | 4.0 | 149.0 | 0.00 | 4.15 | 0.18 | 6.0 | 2.00 | 106.50 | 496000 | 111000 | |||
| D1300-150 | 150 | 4.00 | 158.0 | 125.0 | 131.0 | 12.0 | 11.2 | 4.0 | 155.0 | 4.15 | 0 | 7.5 | 2.50 | 106.80 | 485000 | 144000 | ||||
| D1300-155 | 155 | 4.00 | 0 | 164.0 | 130.0 | 136.0 | 12.0 | 11.4 | 4.0 | 160.0 | 4.15 | 7.5 | 2.50 | 128.00 | 502000 | 148000 | ||||
| D1300-160 | 160 | 4.00 | -0.075 | 169.0 | 133.0 | 139.0 | 13.0 | 11.6 | 4.0 | 165.0 | 4.15 | 7.5 | 2.50 | 130.50 | 518000 | 153000 | MAJOR | |||
| D1300-165 | 165 | 4.00 | 174.5 | 138.0 | 144.0 | 13.0 | 11.8 | 4.0 | 170.0 | 4.15 | 7.5 | 2.50 | 132.00 | 534000 | 158000 | 77 | ||||
| D1300-170 | 170 | 4.00 | 179.5 | 145.0 | 150.0 | 13.5 | 12.2 | 4.0 | 175.0 | 4.15 | 7.5 | 2.50 | 149.50 | 550000 | 163000 | |||||
| D1300-175 | 175 | 4.00 | 184.5 | 149.0 | 155.0 | 13.5 | 12.7 | 4.0 | 180.0 | 4.15 | 7.5 | 2.50 | 158.50 | 566000 | 167000 | |||||
| D1300-180 | 180 | 4.00 | 189.5 | 153.0 | 158.0 | 14.2 | 13.2 | 4.0 | 185.0 | 4.15 | 7.5 | 2.50 | 168.00 | 583000 | 172000 | |||||
| D1300-185 | 185 | 4.00 | 194.5 | 157.0 | 162.0 | 14.2 | 13.7 | 4.0 | 190.0 | 4.15 | 7.5 | 2.50 | 177.50 | 599000 | 177000 | |||||
| D1300-190 | 190 | 4.00 | 199.5 | 1.7 | 162.0 | 167.0 | 14.3 | 13.8 | 4.0 | 195.0 | 4.15 | 7.5 | 2.50 | 184.00 | 615000 | 181000 | ||||
| D1300-195 | 195 | 4.00 | 204.5 | -0.72 | 167.0 | 172.0 | 14.2 | 13.8 | 4.0 | 200.0 | 0.72 | 4.15 | 7.5 | 2.50 | 189.60 | 631000 | 186000 | |||
| D1300-200 | 200 | 4.00 | 209.5 | 171.0 | 177.0 | 14.3 | 14.0 | 4.0 | 205.0 | 0.00 | 4.15 | 7.5 | 2.50 | 196.00 | 647000 | 191000 | ||||
| D1300-210 | 210 | 5.00 | 222.0 | 181.0 | 188.0 | 14.2 | 14.0 | 4.0 | 216.0 | 5.15 | 9.0 | 3.00 | 263.00 | 739000 | 241000 | |||||
| D1300-220 | 220 | 5.00 | 232.0 | 191.0 | 198.0 | 14.2 | 14.0 | 4.0 | 226.0 | 5.15 | 9.0 | 3.00 | 276.00 | 774000 | 252000 | |||||
| D1300-230 | 230 | 5.00 | 242.0 | 201.0 | 208.0 | 14.2 | 14.0 | 4.0 | 236.0 | 5.15 | 9.0 | 3.00 | 291.00 | 809000 | 264000 | |||||
| D1300-240 | 240 | 5.00 | 252.0 | 211.0 | 218.0 | 14.2 | 14.0 | 4.0 | 246.0 | 5.15 | 9.0 | 3.00 | 304.00 | 845000 | 275000 | |||||
| D1300-250 | 250 | 5.00 | 262.0 | 221.0 | 228.0 | 14.2 | 14.0 | 4.0 | 256.0 | 5.15 | 9.0 | 3.00 | 318.50 | 880000 | 286000 | |||||
| D1300-260 | 260 | 5.00 | 275.0 | 2 | 227.0 | 236.0 | 16.2 | 16.0 | 5.0 | 268.0 | 5.15 | 12.0 | 4.00 | 385.00 | 915000 | 398000 | ||||
| D1300-270 | 270 | 5.00 | 285.0 | -0.81 | 237.0 | 246.0 | 16.2 | 16.0 | 5.0 | 278.0 | 0.81 | 5.15 | 12.0 | 4.00 | 401.50 | 950000 | 413000 | |||
| D1300-280 | 280 | 5.00 | 295.0 | 247.0 | 256.0 | 16.2 | 16.0 | 5.0 | 288.0 | 0.00 | 5.15 | 12.0 | 4.00 | 417.50 | 985000 | 428000 | ||||
| D1300-290 | 290 | 5.00 | 305.0 | 257.0 | 266.0 | 16.2 | 16.0 | 5.0 | 298.0 | 5.15 | 12.0 | 4.00 | 433.40 | 1020000 | 443000 | |||||
| D1300-300 | 300 | 5.00 | 315.0 | 267.0 | 276.0 | 16.2 | 16.0 | 5.0 | 308.0 | 5.15 | 12.0 | 4.00 | 446.00 | 1060000 | 458000 | |||||
| D1300-310 | 310 | 6.00 | 327.0 | 271.0 | 282.0 | 20.2 | 20.0 | 6.0 | 320.0 | 6.20 | 15.0 | 5.00 | 658.50 | 1310000 | 594000 | |||||
| D1300-320 | 320 | 6.00 | 337.0 | 281.0 | 292.0 | 20.2 | 20.0 | 6.0 | 330.0 | 6.20 | 15.0 | 5.00 | 682.00 | 1350000 | 613000 | |||||
| D1300-330 | 330 | 6.00 | 347.0 | 291.0 | 302.0 | 20.2 | 20.0 | 6.0 | 340.0 | 6.20 | 15.0 | 5.00 | 705.00 | 1390000 | 632000 | MAJOR | ||||
| D1300-340 | 340 | 6.00 | 357.0 | 301.0 | 312.0 | 20.2 | 20.0 | 6.0 | 350.0 | 6.20 | 15.0 | 5.00 | 729.00 | 1440000 | 650000 | X 77 | ||||
| D1300-350 | 350 | 6.00 | 367.0 | 2.2 | 311.0 | 322.0 | 20.2 | 20.0 | 6.0 | 360.0 | 0.89 | 6.20 | 0.22 | 15.0 | 5.00 | 752.50 | 1480000 | 669000 | ||
| D1300-360 | 360 | 6.00 | 0 | 377.0 | -1 | 321.0 | 332.0 | 20.2 | 20.0 | 6.0 | 370.0 | 0.00 | 6.20 | 0 | 15.0 | 5.00 | 769.00 | 1520000 | 688000 | |
| D1300-370 | 370 | 6.00 | -0.18 | 387.0 | 331.0 | 342.0 | 20.2 | 20.0 | 6.0 | 380.0 | 6.20 | 15.0 | 5.00 | 793.00 | 1560000 | 707000 | ||||
| D1300-380 | 380 | 6.00 | 397.0 | 341.0 | 352.0 | 20.2 | 20.0 | 6.0 | 390.0 | 6.20 | 15.0 | 5.00 | 817.00 | 1690000 | 726000 | |||||
| D1300-390 | 390 | 6.00 | 407.0 | 351.0 | 362.0 | 20.2 | 20.0 | 6.0 | 400.0 | 6.20 | 15.0 | 5.00 | 838.50 | 1646000 | 745000 | |||||
| D1300-400 | 400 | 6.00 | 417.0 | 361.0 | 372.0 | 20.2 | 20.0 | 6.0 | 410.0 | 6.20 | 15.0 | 5.00 | 862.50 | 1689000 | 764000 |
- Row 1 (D1300-8): Same merged-tolerance reading as the DIN 471 chart: a tolerance band printed once applies to the whole row group until the next printed band; empty cells inherit upward, never interpolated.
Materials
- A2 stainless steel
Ordering & documentation
Documents
Shipments are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The fastener family (DIN 472 Internal Retaining Rings (for Bores)) plus the standard designation from your drawing — DIN / ISO / JIS / ASTM / ANSI, or a drawing for custom parts.
- Size (diameter and length), thread type (metric or inch), property class or grade, and coating or finish.
- Quantity per size and your target delivery date.
- Destination country, and any required documents (for example a mill test certificate) so the quote includes them.
Sample & supply
Minimum order quantities and lead times for this family are confirmed at quotation — send your sizes, grades and quantities on the RFQ and the quote will carry a firm schedule. Sample availability is confirmed with the quotation.
Storage & shipping
Parts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 471 or DIN 472 — which standard applies to my joint?
The shaft carries the groove: DIN 471 rings seat into a groove on the outside of a shaft, while DIN 472 rings seat into a groove machined inside a housing or bore. Both are axially assembled, both remove and refit with retaining-ring pliers, and both share the same A2 stainless material attribution in the collected sheets. Quote the standard that matches where the groove is machined.
Why does the groove width at d1 = 9 look off-scale?
The sampled row is quoted token-for-token from the collected sheet, and at the smallest sizes the extracted column layout is ambiguous (the 472 sheet prints its groove columns as d2 / m / t / n in a tight layout). Values at d1 = 9 are therefore quoted exactly as printed rather than reattributed; confirm the groove width and depth for the smallest bores on the RFQ before machining.
What should an RFQ for these retaining rings state?
State the standard (DIN 471 external for a shaft, or DIN 472 internal for a bore), the shaft or bore nominal diameter, the ring material (the collected sheets attribute A2 stainless steel to the rings), the groove diameter and width your drawing machines, and quantity per size. Commercial terms are confirmed at quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your inquiry
- ✓ Standard and property class (e.g. DIN 912, ISO 4762, class 8.8) — or a drawing for custom parts.
- ✓ Sizes, lengths and thread type (metric or inch).
- ✓ Quantity per size and your target delivery date.
- ✓ Destination country, plus any coating or finish requirement.
- ✓ Any documents you need with the shipment (e.g. mill test certificate) so the quote includes them.
- ✓ Your inquiry goes straight to the factory team by email and gets a reply within 24 hours.
- ✓ Factory-direct pricing
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support