PSM P-S / P-CLS Self-Clinching Nuts (P-Series)

PSM International P-S (hardened steel) and P-CLS (stainless) self-clinching nuts — metric thread sizes M2 to M12, shank-code sheet-thickness variants, hole-size and body dimensions, with the PSMPS heavy-duty and P-SP thin-sheet series positions from the same guide.

Last updated: 2026-11

Request a Quote

PSM P-S / P-CLS Self-Clinching Nuts (P-Series) in an industrial setting
Illustrative image redrawn from real PSM P-S / P-CLS Self-Clinching Nuts (P-Series) product references — not a photograph of stocked items.

Specifications

The P-S and P-CLS nuts are PSM International's standard self-clinching nuts: press them into a pre-punched hole in a softer host sheet and the serrated clinch ring displaces the sheet metal into an annular groove, locking the nut flush and permanently into the panel — strong reusable threads in sheet too thin to tap, with no welding or back-side access needed. P-S is the hardened-steel-plated version (standard plating zinc with clear trivalent passivation, code Z), P-CLS the stainless version; the steel variant installs into sheets up to Rb 80 hardness, the stainless up to Rb 70 — the host sheet must be softer than the nut body for the clinch to form, which is why these nuts are not suitable for hardened steel or stainless sheet. The metric table covers threads M2 through M12, including the close-fit 3.5M3 size; within each thread, shank codes select the sheet-thickness range (code 0 installs in the thinnest sheets — 0.8 to 1.0 mm at M3 — with code 1 and 2 variants stepping up, e.g. 1.4 and 2.3 mm minimums at M6). The printed part-number structure P-S-M4-1-Z reads as series-thread-shank code-plating, so an RFQ can specify the exact variant unambiguously. Two sibling series share this guide page: PSMPS, the heavy-duty large-flange variant for higher push-out loads and extra bearing area, and P-SP, the thin-sheet variant for gauges below where standard P-S develops sufficient clinch retention. Where the standard series does not apply — aluminium panels, or PEM-series equivalents — the separate P-CLA and S/CLS/SP pages in this catalog cover those lines.

Series / scope PSM P-S & P-SS (hardened steel, plated) and P-CLS & P-CLSS (stainless steel; the SS/CLSS codes refer to M5 sizes only per the printed material note); sibling series on the same guide: PSMPS (heavy-duty large flange) and P-SP (thin sheet)
Thread range (metric) M2, M2.5, M3, 3.5M3, M3.5, M4, M5, M6, M8, M10, M12 (3.5M3 = close-fit M3; M6 additionally prints shank code 00)
Sheet thickness (shank codes) code 0: 0.8–1.0 mm min sheet at M2–M5; code 00/0/1/2 ladder at M6 (min sheet 0.92/1.2/1.4/2.3); codes 1–2 at M8–M12 (M8 from 1.4, M10 from 2.31, M12 from 3.18 mm) — per the printed "For Min Sheet Thickness" column
Hole size in sheet printed per size with +0.08/-0.00 tolerance: 4.25 (M2–M3), 4.75 (3.5M3/M3.5), 5.4 (M4), 6.4 (M5), 8.75 (M6), 10.5 (M8), 14.0 (M10), 16.66 (M12); hole prep tolerance is the clinch-critical dimension
Body dimensions shank dia C max 4.22 (M2–M3) to 16.64 (M12); body dia E ±0.25 6.3 to 20.0; body depth T ±0.25 1.5 to 9.14; min centre-line-to-edge distance 4.8 (M2) to 16.0 (M12)
Max sheet hardness P-S & P-SS: Rb 80; P-CLS & P-CLSS: Rb 70 (host sheet must be softer than the nut body)
Plating standard finish zinc & clear trivalent passivation, plating code Z in the part number P-S-M4-1-Z (product / thread / shank / plating segments printed per segment in the source's "How to Specify" tables)
Performance (sample, steel sheet) M3 code 0: installation 11.0–15.5 kN, push-out 500 N, torque-out 1.7 Nm; M6 code 0: 25.0–36.0 kN, 1330 N, 12.6 Nm (source prints values as averages for correct installation; aluminium-sheet columns lower — see the source table; one split sub-row in the printed metric performance table, M10 shank code 2, is flagged and not transcribed here)
Installation press installation with flat-faced punch and smooth flat anvil — the guide prints typical forces from around 2 kN (small sizes, thin aluminium) to 20+ kN (larger sizes, thicker steel); hand tools are not suitable
Not tabulated MOQ, lead time and price are confirmed at quotation (no published terms carried for this family); unified (inch) thread ladder exists on the same source page but is not transcribed on this page
P-S & P-CLS self-clinching nuts (metric) — sheet-thickness codes, dimensions as printed by the sourceAll dimensions in mm as printed by the source. Shank code selects minimum sheet thickness; hole size tolerance +0.08/-0.00; body E +/-0.25; depth T +/-0.25, all as printed.
Thread size / codeShank codeFor min sheet thicknessA maxHole size in sheet +0.08/-0.00Shank C maxBody E +/-0.25Body depth T +/-0.25Min distance hole centre to sheet edge
M200.8 - 1.00.774.254.226.31.54.8
M211.00.974.254.226.31.54.8
M221.41.384.254.226.31.54.8
M2.500.8 - 1.00.774.254.226.31.54.8
M2.511.00.974.254.226.31.54.8
M2.521.41.384.254.226.31.54.8
M300.8 - 1.00.774.254.226.31.54.8
M311.00.974.254.226.31.54.8
M321.41.384.254.226.31.54.8
3.5M300.8 - 1.00.774.754.737.11.75.6
3.5M311.00.974.754.737.11.75.6
3.5M321.41.384.754.737.11.75.6
M3.500.8 - 1.00.774.754.737.11.55.6
M3.511.00.974.754.737.11.55.6
M3.521.41.384.754.737.11.55.6
M400.8 - 1.00.775.45.387.92.06.9
M411.00.975.45.387.92.06.9
M421.41.385.45.387.92.06.9
M500.8 - 1.00.776.46.388.72.07.1
M511.00.976.46.388.72.07.1
M521.41.386.46.388.72.07.1
M6000.920.898.758.7211.054.088.6
M601.21.158.758.7211.054.088.6
M611.41.388.758.7211.054.088.6
M622.32.218.758.7211.054.088.6
M811.41.3810.510.4712.655.479.7
M822.32.2110.510.4712.655.479.7
M1012.312.2114.013.9717.357.4813.5
M1023.183.0514.013.9717.357.4813.5
M1213.183.0516.6616.6420.09.1416.0
M1226.005.9716.6616.6420.09.1416.0
P-S & P-CLS self-clinching nuts (metric) — performance in cold rolled steel and 5052-H34 aluminium, as printed by the sourceInstallation in kN, pushout in N, torque-out in Nm as printed. The performance table stops at M10 on the source (no M12 row is printed); M10 shank codes 1 and 2 print identical values, as on the source.
Thread codeShank codeSteel: installation (kN)Steel: pushout (N)Steel: torque-out (Nm)Aluminium: installation (kN)Aluminium: pushout (N)Aluminium: torque-out (Nm)
M2 M2.5 M3011.0 - 15.55001.77.0 - 9.02800.95
M2 M2.5 M3111.0 - 15.56001.97.0 - 9.04201.15
M2 M2.5 M3211.0 - 15.510002.17.0 - 9.07001.40
3.5M3014.0 - 22.0550211.0 - 14.03501.70
3.5M3114.0 - 22.07202.4511.0 - 14.04801.85
3.5M3214.0 - 22.011502.511.0 - 14.08002.10
M3.5014.0 - 22.0550211.0 - 14.03501.70
M3.5114.0 - 22.07202.4511.0 - 14.04801.85
M3.5214.0 - 22.011502.511.0 - 14.08002.10
M4017.0 - 27.06002.9512.0 - 15.04002.20
M4117.0 - 27.07504.612.0 - 15.05502.70
M4217.0 - 27.013205.712.0 - 15.09004.30
M5019.0 - 33.06704.113.0 - 17.04603.20
M5119.0 - 33.09505.4513.0 - 17.06204.10
M5219.0 - 33.012307.113.0 - 17.08705.50
M6025.0 - 36.0133012.617.0 - 29.09508.10
M6125.0 - 36.0182015.517.0 - 29.0148010.1
M6225.0 - 36.0214016.817.0 - 29.0156013.5
M8127.0 - 39.0254025.120.0 - 32.0189015.6
M8227.0 - 39.0310029.520.0 - 32.0217018.9
M10135.0 - 50.035604525.0 - 36.0265035.0
M10235.0 - 50.035604525.0 - 36.0265035.0

Materials

  • P-S / P-SS: hardened steel, zinc & clear trivalent passivation (Z). P-CLS / P-CLSS: stainless steel, unplated (CLSS at M5 only). Host sheet must be softer than the nut body — mild steel, aluminium, copper and brass sheet per the guide; not for hardened steel or stainless host sheets. Commercial terms (MOQ, lead time, price) are confirmed at quotation.

Ordering & documentation

Documents

Shipments of PSM P-S / P-CLS Self-Clinching Nuts (P-Series) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for PSM P-S / P-CLS Self-Clinching Nuts (P-Series) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (PSM P-S / P-CLS Self-Clinching Nuts (P-Series)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for psm p-s / p-cls self-clinching nuts (p-series) are confirmed at quotation — send series, thread size and parent sheet thickness on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

PSM P-S / P-CLS Self-Clinching Nuts (P-Series) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store psm p-s / p-cls self-clinching nuts (p-series) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

P-S, P-CLS, PSMPS or P-SP — which P-series nut fits my panel?

The four are the same clinching principle with different geometry and job focus. P-S is the standard choice for general sheet-metal assembly in mild steel and aluminium. P-CLS is the concealed-head variant — the body sits flush on the clinch side, giving a smooth outer panel surface when appearance or clearance matters. PSMPS adds a large flange for higher push-out loads and extra bearing area on thin sheet. P-SP is the thin-sheet specialist for gauges below where a standard P-S would not develop sufficient clinch retention. Pick by three inputs: host sheet material and thickness (the shank-code ladder must cover it), whether the outboard face needs to stay flush, and the push-out/torque-out load the joint sees. If two series both cover your sheet, the printed performance table on this page's source gives the push-out and torque-out figures to compare.

How is the hole in the sheet specified, and why does the shank code matter?

The hole size is printed per thread size with a +0.08/-0.00 tolerance — for example 4.25 mm at M2–M3, 8.75 mm at M6, 16.66 mm at M12 — and it is the clinch-critical dimension: too large and the clinch ring has no material to displace, too small and the shank cannot enter. The shank code then selects the sheet-thickness range within that thread: at M3, code 0 installs into sheet as thin as 0.8 mm, while the code 1 and 2 variants step up through 1.0 and 1.4 mm minimums (the source prints the exact pair per code). Read both off your panel drawing and quote them in the part number — P-S-M4-1-Z fixes the series, thread, shank code and plating in one string, which is the safest way to RFQ the exact variant.

Why can't I clinch these into stainless or hardened sheet?

Self-clinching works by the host sheet flowing into the nut's clinch groove under press force — that only happens when the sheet is softer than the nut body. The guide prints the ceilings at Rb 80 for the steel P-S and Rb 70 for the stainless P-CLS; hardened steel and stainless host sheets exceed what the clinch ring can displace, and the result is an incomplete clinch with a fraction of the rated push-out and torque-out. For harder host materials, the guide points to anchor rivet bushes as the appropriate product family — those cut or form their own retention instead of relying on sheet flow.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your PSM P-S / P-CLS Self-Clinching Nuts (P-Series) inquiry

  • ✓ Identify the clinch-nut, stud or standoff series and the internal thread size.
  • ✓ Specify parent-sheet material, hardness and actual thickness, not gauge alone.
  • ✓ Provide prepared-hole diameter, edge distance and hole-to-hole spacing from the panel drawing.
  • ✓ State locking/non-locking requirement, installation press/tooling and any push-out or torque-out acceptance data.
  • ✓ Factory-direct pricing for your PSM P-S / P-CLS Self-Clinching Nuts (P-Series)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.