SMTSO / SMTSOB Surface Mount Standoffs

ReelFast surface mount nuts and spacers/standoffs — SMTSO (steel) and SMTSOB (brass), threaded or unthreaded, supplied on 330 mm EIA-481 reels for pick-and-place assembly, unified #0-80 to #8-32 and metric M1 to M4.

Last updated: 2026-11

Request a Quote

SMTSO / SMTSOB Surface Mount Standoffs in an industrial setting
Illustrative image redrawn from real SMTSO / SMTSOB Surface Mount Standoffs product references — not a photograph of stocked items.

Specifications

SMTSO and SMTSOB are surface mount standoffs: instead of clinching into a hole, they sit on a printed solder pad and are attached in the reflow soldering step, so a standoff can be placed by the same pick-and-place machine that places the other components. SMTSO is the steel series and SMTSOB the brass series; both are available threaded or unthreaded (the unthreaded part is the spacer/standoff version of the same footprint). The collected table runs unified #0-80 through #8-32 and metric M1 through M4, each with its sheet hole size (+.003/-.000 in, +0.08/-0 mm), minimum solder pad, maximum head dimensions, and minimum board thickness. Parts are packaged on 330 mm recyclable reels conforming to EIA-481, with 24 mm tape. Unlike the clinched SO/BSO families, there is no minimum-sheet cold-flow requirement: the table lists a minimum thickness for the board rather than a clinch range, and the board hole is a clearance feature while the solder pad carries the joint.

Series SMTSO (steel) and SMTSOB (brass) — ReelFast surface mount nuts and spacers/standoffs, threaded or unthreaded
Mounting method Surface mount on a solder pad, attached in reflow — placed by pick-and-place equipment, no clinching step and no through-board press
Packaging 330 mm recyclable reels conforming to EIA-481; tape width 24 mm
Thread range (unified) #0-80 (SMTSO only), #2-56, #4-40, #6-32, #8-32 (SMTSO and SMTSOB from #2-56 up)
Thread range (metric) M1, M1.2, M1.4, M1.6 (SMTSO only); M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6, M4 x 0.7 (SMTSO and SMTSOB)
Length codes (unified) L in 32nds of an inch ±.005 — code 2 = .062, 4 = .125, 8 = .250, 12 = .375
Length codes (metric) L in millimeters ±0.13 — ladder codes 1–12; the micro sizes (M1–M1.6) list codes 1–3, M2–M4 list 2, 3, 4, 6, 8, 10 (code 1 not offered at M2 and up)
Sheet hole size, unified (by thread) #0-80 Ø.098, #2-56 Ø.147, #4-40 Ø.166, #6-32 Ø.213, #8-32 Ø.250 in — each +.003/-.000
Sheet hole size, metric (by thread) M1–M1.6 Ø3.18; M2 Ø3.73, M2.5/M3 Ø4.22, M3.5 Ø5.41, M4 Ø6.35 mm — each +0.08/-0
Minimum solder pad (unified, by thread) #0-80 .165, #2-56 .244, #4-40 .244, #6-32 .306, #8-32 .369 in
Minimum solder pad (metric, by thread) M2 6.2, M2.5 6.2, M3 6.2, M3.5 7.77, M4 9.37 mm
Minimum board thickness .060 in (unified rows); 1.53 mm (metric M2–M4 rows); 0.5 mm (metric micro rows M1–M1.6)
Head dimensions (sampled, steel unified) #2-56: A max .142, C max —, H ref .219; #4-40: A max .161, H ref .219; #6-32: A max .208, H ref .281; #8-32: A max .245, H ref .344 in
Head dimensions (sampled, metric) M2: A max 3.6, hole Ø3.73, pad 6.2; M3: A max 4.09, hole Ø4.22, pad 6.2; M3.5: A max 5.28, hole Ø5.41, pad 7.77; M4: A max 6.22, hole Ø6.35, pad 9.37 mm
MOQ / lead time Not owner-confirmed for this family — confirmed at quotation

Materials

  • Steel (SMTSO series)
  • Brass (SMTSOB series)

Ordering & documentation

Documents

Shipments of SMTSO / SMTSOB Surface Mount Standoffs are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for SMTSO / SMTSOB Surface Mount Standoffs orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (SMTSO / SMTSOB Surface Mount Standoffs), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for smtso / smtsob surface mount standoffs are confirmed at quotation — send series, thread size and parent sheet thickness on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

SMTSO / SMTSOB Surface Mount Standoffs are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store smtso / smtsob surface mount standoffs dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How is an SMTSO standoff different from a clinched SO or BSO standoff?

A clinched SO/BSO standoff is pressed into a thin metal sheet and holds by cold-flowing the sheet around its knurged shank, so it needs a controlled clinching hole and a minimum sheet thickness for the cold flow. An SMTSO standoff never clinches: it is placed on a printed solder pad by pick-and-place equipment and joined in the reflow step, so the board hole is a clearance feature and the solder pad — not the sheet — carries the joint. That is why the SMTSO table gives both a hole size and a minimum solder pad per thread size, and why SMT parts work on PC boards where there is no sheet to clinch at all.

When do I choose SMTSOB brass instead of SMTSO steel?

The collected table offers both materials from #2-56 / M2 upward, with steel-only availability at the smallest sizes (#0-80, and metric M1–M1.6). Brass is commonly chosen for its conductivity and softer thread seating; the mechanical figures in the table (hole size, solder pad, head dimensions) are shared per thread size across both materials, so the choice does not change the board layout. Confirm the material and finish on the RFQ — commercial terms are confirmed at quotation.

What should an RFQ for SMTSO standoffs state?

State the series (SMTSO steel or SMTSOB brass, threaded or unthreaded), thread size (for example #4-40 or M3 x 0.5), length code, and whether reel packaging is required for pick-and-place feeding. Quantity per size and destination country complete the RFQ. Commercial terms are confirmed at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your SMTSO / SMTSOB Surface Mount Standoffs inquiry

  • ✓ Identify the clinch-nut, stud or standoff series and the internal thread size.
  • ✓ Specify parent-sheet material, hardness and actual thickness, not gauge alone.
  • ✓ Provide prepared-hole diameter, edge distance and hole-to-hole spacing from the panel drawing.
  • ✓ State locking/non-locking requirement, installation press/tooling and any push-out or torque-out acceptance data.
  • ✓ Factory-direct pricing for your SMTSO / SMTSOB Surface Mount Standoffs
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.