Rivets
Blind rivets available in aluminum, copper, steel and stainless steel with dome, countersunk, large and extra large head options, compliant with NF-E 25-701/25-702 standards.
Last updated: 2026-11
Specifications
Current supplyable range — owner-confirmed scope of supply; requirements outside this range are confirmed per quotation.
| diameter | Up to M36 / 1-1/2" (36 mm) |
|---|---|
| length | Up to 300 mm |
| coating | Zinc plated (blue/yellow), Geomet, Dacromet, hot-dip galvanized |
| standard | DIN 7337 / ISO 15977 (open-end blind rivets); IFI-114 |
| moq | 10000-50000 pieces |
| lead time | 10-20 days |
| head type | Blind (pop), solid, structural rivets |
| price from | USD 0.005-0.02/pc |
Materials
- Carbon steel 10B21/10B33/35K/45K
- Stainless steel A2-70 (304) / A4-80 (316)
- Alloy steel Grade 8.8-12.9
- Brass CW614N
- Aluminum 6061
Ordering & documentation
Documents
Shipments are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The fastener family (Rivets) plus the standard designation from your drawing — DIN / ISO / JIS / ASTM / ANSI, or a drawing for custom parts.
- Size (diameter and length), thread type (metric or inch), property class or grade, and coating or finish.
- Quantity per size and your target delivery date.
- Destination country, and any required documents (for example a mill test certificate) so the quote includes them.
Sample & supply
Minimum order quantity is 10,000–50,000 pieces depending on size. Standard production run 10–20 days. Quantities or variants outside the standard range are confirmed at quotation.
Storage & shipping
Parts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Available grades
Each F1554 grade has its own specification page — mechanical properties, ordering details and RFQ guidance per grade.
Choosing between blind rivets? See the blind rivet type comparison — open-end, closed-end, multi-grip and structural side by side.
- Open-End Blind Rivets (DIN 7337 / ISO 15977)
- Closed-End Blind Rivets
- Structural Blind Rivets
- Rivet Nuts (Blind Threaded Inserts)
- DIN 660 Round Head Solid Rivets
- DIN 661 Countersunk Solid Rivets
- DIN 7340 Tubular Rivets
- Flat Head Round Body Open-End Rivet Nuts
- Closed-End Rivet Nuts
- Countersunk Head Rivet Nuts
- Full Hex Body Rivet Nuts
- Half-Hex Body Rivet Nuts
- Knurled Round Body Rivet Nuts (Thin-Wall / Low-Profile)
- High-Strength Rivet Nuts (Class 10 / Grade 8)
- Multi-Grip Blind Rivets
- Peel Blind Rivets
- Tri-Fold Blind Rivets
- Hammer-Drive Blind Rivets
- Grooved Blind Rivets
- Knurled Blind Rivets (Electrical Earthing)
- High-Strength Blind Rivets for Thin & Fragile Materials
- Semi-Tubular Rivets
- Self-Piercing Rivets (SPR)
- Hardened Steel Self-Piercing Rivets
- Self-Piercing Rivets — Inch Work-Thickness Series
- Commercial Solid Rivets (Inch Series, Per-Head-Type)
- Aerospace Solid Rivets (MS / AN / NAS Series)
- DIN 7338 Rivets for Brake and Clutch Linings
- DIN 674 Flat Round Head Rivets
- Solid Rivet Head Dimensions by Head Type
- DIN EN ISO 16583 Open End Blind Rivets, Countersunk Head, Cu/St (Break Pull Mandrel)
- DIN 302 Countersunk Head Rivets
- DIN 662 Mushroom Head Rivets
- DIN 6791 Semi-Tubular Pan Head Rivets
- DIN 6792 Semi-Tubular Countersunk Head Rivets
- DIN 7331 Compression Rivets
- DIN 7339 Hollow Rivets, One Piece, Drawn from Strip
Frequently asked questions
Open-end blind rivets or structural rivets — which do I need?
Open-end blind rivets (DIN 7337 / ISO 15977) cover general-purpose blind fastening; structural rivets (IFI-114) are the higher-strength choice where the joint must handle greater shear and clamp. Name the application and the grip range on the RFQ — the quote confirms which family and head style (blind, solid, structural) fits before production.
Which rivet material suits my environment?
The quoted range covers carbon steel (10B21/10B33/35K/45K), stainless A2-70 (304) and A4-80 (316), alloy steel grade 8.8–12.9, brass CW614N and aluminum 6061. Aluminum body rivets suit general outdoor weight-sensitive work; A4 stainless suits marine and chemical exposure. If the service environment is aggressive, say so in the RFQ and the quote confirms the material pairing with you.
What is the MOQ and lead time for rivets?
The minimum order quantity is 10,000–50,000 pieces depending on size. Standard production runs 10–20 days. Head options and coatings outside the standard list are confirmed at quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your inquiry
- ✓ Standard and property class (e.g. DIN 912, ISO 4762, class 8.8) — or a drawing for custom parts.
- ✓ Sizes, lengths and thread type (metric or inch).
- ✓ Quantity per size and your target delivery date.
- ✓ Destination country, plus any coating or finish requirement.
- ✓ Any documents you need with the shipment (e.g. mill test certificate) so the quote includes them.
- ✓ Your inquiry goes straight to the factory team by email and gets a reply within 24 hours.
- ✓ Factory-direct pricing
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support