Closed-End Blind Rivets

Documents

Shipments are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

• The fastener family (Closed-End Blind Rivets) plus the standard designation from your drawing — DIN / ISO / JIS / ASTM / ANSI, or a drawing for custom parts.
• Size (diameter and length), thread type (metric or inch), property class or grade, and coating or finish.
• Quantity per size and your target delivery date.
• Destination country, and any required documents (for example a mill test certificate) so the quote includes them.

Sample & supply

Minimum order quantity is 10,000–50,000 pieces depending on size. Standard production run 10–20 days. Quantities or variants outside the standard range are confirmed at quotation.

Storage & shipping

Parts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Is a closed-end rivet truly watertight?

It is sealed as a fastener, not as a gasket: the cupped body closes the mandrel channel, so water cannot wick through the center of the rivet the way it can in an open-end set — the industry guide rates the type as fully sealed with the core shaft locked. What it does not do is seal the clearance hole around the rivet. For a weather line — curtain wall, roofing, enclosures — the closed-end rivet removes the through-path; for a pressure boundary, add the sealant or gasket the joint design calls for and treat the rivet as the mechanical fastener, not the gasket.

What is the MOQ and lead time for these rivets?

Minimum order quantity is 10,000–50,000 pieces depending on size and material. Standard production lead time is 10–20 days. Common blind rivet sizes are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these rivets state?

State the rivet subtype (open-end, closed-end, structural blind rivet or rivet nut), body diameter, grip range or total material thickness, head style (dome, countersunk or large flange), body and mandrel materials (for example aluminum body with steel mandrel, or all-stainless), finish, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.