WA06 Scroll Security Barrel Nuts & Sex Bolts
Scroll (wave) spanner-drive security barrel nuts — female internally threaded sex-bolt halves with the high-torque scroll drive, M2–M48 metric and No.2–7/8" imperial as tabulated (head heights 3.2–14.2 mm, diameters 7.9–38.0 mm). Made to order; A1/A4 stainless, mild/HT steel, case-hardened.
Last updated: 2026-11
Specifications
The scroll security barrel nut pairs the wave-profile spanner drive with the barrel-nut (sex bolt) body: a female, internally threaded sleeve whose flange carries the scroll pattern, so the mating screw is hidden inside the joint while the head still refuses every standard tool. The collected tabulation mirrors the scroll nut tables — M2 to M48 metric (head heights 3.2–14.2 mm, head diameters 7.9–38.0 mm) and No. 2 to 7/8" imperial — with the same dash-celled gaps. The material spread is wider than the standard scroll nut: A1 and A4 stainless, mild and high-tensile steel, case-hardened steel and plastic. Two practical differences from the catalogued scroll nut matter at ordering time: this barrel-nut line is made to order only — the source states there is no stock chart, though some sizes may be held — and the drive tool is restricted, distributed only to registered purchasers of the fixings. Panels and assemblies that must present a tool-proof face yet come apart for the rightful owner are its ground.
| Designation | WA06 — scroll security barrel nut (sex bolt half); waved scroll drive on a female internally threaded barrel body |
|---|---|
| Metric thread range (tabulated) | M2 – M48 (standard and fine pitch) |
| Head height K per thread (mm) | M2–M4 3.2 · M5 4.2 · M6 5.5 · M8 6.4 · M10 7.2 · M12 8.7 · M14/M16 11.0 · M20/M22 12.8 · M24 14.2 (M9, M30, M33, M36, M39–M48 not tabulated — dash cells in source) |
| Head diameter DK per thread (mm) | M2–M4 7.9 · M5 9.5 · M6 12.7 · M8 15.8 · M10 19.0 · M12 22.2 · M14/M16 28.5 · M20/M22 34.9 · M24 38.0 |
| Imperial gauges (tabulated) | No. 2 – No. 12, 1/4" – 7/8" (K 3.2–14.2 mm, DK 7.9–38.0 mm; 1" and above are dash cells in source — not rendered) |
| Security principle | Scroll drive with restricted tool distribution — tools limited to registered purchasers with a customer-specific reference number |
| Supply model (source-stated) | Made to order only — no stock chart, though some sizes may be held; specials and customer drawings accommodated |
| Materials (collected) | A1 stainless, A4 stainless, mild steel, high tensile steel, case hardened; plastic to order |
Materials
- A1 stainless steel
- A4 stainless steel
- Mild steel
- High tensile steel
- Case hardened steel
- Plastic (to order)
Ordering & documentation
Documents
Shipments are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The fastener family (WA06 Scroll Security Barrel Nuts & Sex Bolts) plus the standard designation from your drawing — DIN / ISO / JIS / ASTM / ANSI, or a drawing for custom parts.
- Size (diameter and length), thread type (metric or inch), property class or grade, and coating or finish.
- Quantity per size and your target delivery date.
- Destination country, and any required documents (for example a mill test certificate) so the quote includes them.
Sample & supply
Minimum order quantity is 10,000 pieces. Stock items run 3–7 days. Quantities or variants outside the standard range are confirmed at quotation.
Storage & shipping
Parts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How does a scroll barrel nut differ from a standard barrel nut?
The drive, not the body. Both are female internally threaded sleeves that pair with a matching screw to clamp panels from inside, but the standard barrel nut turns with a hex key or spanner, while this one presents a waved scroll face that only a restricted tool engages — and which the source distributes only to registered purchasers. You keep the sex bolt's hidden-thread, clean-face joint and add the tamper-resistance of the scroll drive.
What should I plan for when ordering this line?
Lead time, because the collected page states the barrel-nut line is made to order with no stock chart (some sizes may be held — confirmed at enquiry). State the thread, grip length, material — including the case-hardened option where attack resistance matters — and whether the mating male screws are needed with matched head dimensions. The restricted drive tool is supplied through the same registered channel as the fixings.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the spanner-drive SKU and head style), nominal thread size and pitch, material and finish, whether the matching drive tool or bit is needed, the mating screw or stud specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your inquiry
- ✓ Standard and property class (e.g. DIN 912, ISO 4762, class 8.8) — or a drawing for custom parts.
- ✓ Sizes, lengths and thread type (metric or inch).
- ✓ Quantity per size and your target delivery date.
- ✓ Destination country, plus any coating or finish requirement.
- ✓ Any documents you need with the shipment (e.g. mill test certificate) so the quote includes them.
- ✓ Your inquiry goes straight to the factory team by email and gets a reply within 24 hours.
- ✓ Factory-direct pricing
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support