ANSI B18.22M Metric Plain Flat Washers (Narrow / Regular / Wide)
ANSI B18.22M metric plain flat washers in three series per size — inside diameter A, outside diameter B and thickness C with max/min limits, sizes 1.6 to 36, printed per row with the standard label on the collected table.
Last updated: 2026-11
Specifications
ANSI B18.22M is the metric counterpart of the US plain-washer standard: a flat annular washer that distributes the bolt or nut bearing load over the sheet and bridges oversized or slotted holes. The collected table prints three series for every nominal size — Narrow, Regular and Wide — which trade the outside diameter against thickness at the same inside diameter: at M20 the narrow series runs an OD of 39 mm at 4 mm max thickness, while the wide series spreads to 66 mm OD at 5.1 mm. Inside diameter A is identical across the three series for a given size (21.8 to 22.32 min/max at size 20), so the series choice only changes the bearing surface and the thickness stack, never the fit on the bolt. The ladder covers seventeen printed sizes, 1.6 through 36, each row carrying max/min limits on all three dimensions — the tolerance band matters when the washer feeds an automated bowl or must sit inside a recessed pocket. Note the designation relationship: ISO 7089/7090 (registered separately in this catalog) cover the metric plain-washer series most of Europe buys to; ANSI B18.22M is the designation US-market drawings call out, and it is the print on this page's source table. The dimension table on this page is the full printed ladder (recaptured live from the source 2026-11-05); sizes above 36 are not covered by the standard's ASME print — the source's calculator offers 42 and larger but prints no ANSI B18.22M rows for them.
| Standard / scope | ANSI B18.22M — metric plain flat washers, Narrow / Regular / Wide series; printed sizes 1.6, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 20, 24, 30, 36 — all tabulated on this page (source calculator also offers 42/48/56/64 but prints no ANSI B18.22M rows for them) |
|---|---|
| Dimensions per row | Inside dia A, outside dia B, thickness C — each with max and min limits (e.g. size 20: A 21.80–22.32; B 38.38–39.00 narrow / 49.00–50.00 regular / 64.80–66.00 wide; C 3.00–4.00 narrow, 3.50–4.60 regular, 4.00–5.10 wide) |
| Series geometry | A identical across the three series per size; B grows narrow → regular → wide (size 30: 54.80–56.00 / 70.80–72.00 / 88.60–90.00); C grows with B (size 30 max: 5.10 / 5.60 / 6.40) |
| Small-size rows (sample) | size 1.6: A 1.95–2.09 all series; B 3.70–4.00 narrow / 4.70–5.00 regular / 5.70–6.00 wide; C 0.50–0.70 narrow & regular, 0.60–0.90 wide |
| Tolerance form | printed max/min pairs per dimension (no ISO H-class hole tolerance scheme on this table) — use the band for feeding/clearance checks, not for a hole-spec callout |
| Not tabulated | Material, hardness, finish — per RFQ (contact for confirmation); order against the bolt size and the series your drawing calls out |
| Washer Size | Washer Series | Standard | A max | A min | B max | B min | C max | C min |
|---|---|---|---|---|---|---|---|---|
| 1.6 | Narrow | ANSI B18.22M | 2.09 | 1.95 | 4.00 | 3.70 | 0.70 | 0.50 |
| 1.6 | Regular | ANSI B18.22M | 2.09 | 1.95 | 5.00 | 4.70 | 0.70 | 0.50 |
| 1.6 | Wide | ANSI B18.22M | 2.09 | 1.95 | 6.00 | 5.70 | 0.90 | 0.60 |
| 2 | Narrow | ANSI B18.22M | 2.64 | 2.50 | 5.00 | 4.70 | 0.90 | 0.60 |
| 2 | Regular | ANSI B18.22M | 2.64 | 2.50 | 6.00 | 5.70 | 0.90 | 0.60 |
| 2 | Wide | ANSI B18.22M | 2.64 | 2.50 | 8.00 | 7.64 | 0.90 | 0.60 |
| 2.5 | Narrow | ANSI B18.22M | 3.14 | 3.00 | 6.00 | 5.70 | 0.90 | 0.60 |
| 2.5 | Regular | ANSI B18.22M | 3.14 | 3.00 | 8.00 | 7.64 | 0.90 | 0.60 |
| 2.5 | Wide | ANSI B18.22M | 3.14 | 3.00 | 10.00 | 9.64 | 1.20 | 0.80 |
| 3 | Narrow | ANSI B18.22M | 3.68 | 3.50 | 7.00 | 6.64 | 0.90 | 0.60 |
| 3 | Regular | ANSI B18.22M | 3.68 | 3.50 | 10.00 | 9.64 | 1.20 | 0.80 |
| 3 | Wide | ANSI B18.22M | 3.68 | 3.50 | 12.00 | 11.57 | 1.40 | 1.00 |
| 3.5 | Narrow | ANSI B18.22M | 4.18 | 4.00 | 9.00 | 8.64 | 1.20 | 0.80 |
| 3.5 | Regular | ANSI B18.22M | 4.18 | 4.00 | 10.00 | 9.64 | 1.40 | 1.00 |
| 3.5 | Wide | ANSI B18.22M | 4.18 | 4.00 | 15.00 | 14.57 | 1.75 | 1.20 |
| 4 | Narrow | ANSI B18.22M | 4.88 | 4.70 | 10.00 | 9.64 | 1.20 | 0.80 |
| 4 | Regular | ANSI B18.22M | 4.88 | 4.70 | 12.00 | 11.57 | 1.40 | 1.00 |
| 4 | Wide | ANSI B18.22M | 4.88 | 4.70 | 16.00 | 15.57 | 2.30 | 1.60 |
| 5 | Narrow | ANSI B18.22M | 5.78 | 5.60 | 11.00 | 10.57 | 1.40 | 1.00 |
| 5 | Regular | ANSI B18.22M | 5.78 | 5.60 | 15.00 | 14.57 | 1.75 | 1.20 |
| 5 | Wide | ANSI B18.22M | 5.78 | 5.60 | 20.00 | 19.48 | 2.30 | 1.60 |
| 6 | Narrow | ANSI B18.22M | 6.87 | 6.65 | 13.00 | 12.57 | 1.75 | 1.20 |
| 6 | Regular | ANSI B18.22M | 6.87 | 6.65 | 18.80 | 18.28 | 1.75 | 1.20 |
| 6 | Wide | ANSI B18.22M | 6.87 | 6.65 | 25.40 | 24.88 | 2.30 | 1.60 |
| 8 | Narrow | ANSI B18.22M | 9.12 | 8.90 | 18.80 | 18.28 | 2.30 | 1.60 |
| 8 | Regular | ANSI B18.22M | 9.12 | 8.90 | 25.40 | 24.88 | 2.30 | 1.60 |
| 8 | Wide | ANSI B18.22M | 9.12 | 8.90 | 32.00 | 31.38 | 2.80 | 2.00 |
| 10 | Narrow | ANSI B18.22M | 11.12 | 10.85 | 20.00 | 19.48 | 2.30 | 1.60 |
| 10 | Regular | ANSI B18.22M | 11.12 | 10.85 | 28.00 | 27.48 | 2.80 | 2.00 |
| 10 | Wide | ANSI B18.22M | 11.12 | 10.85 | 39.00 | 38.38 | 3.50 | 2.50 |
| 12 | Narrow | ANSI B18.22M | 13.57 | 13.30 | 25.40 | 24.88 | 2.80 | 2.00 |
| 12 | Regular | ANSI B18.22M | 13.57 | 13.30 | 34.00 | 33.38 | 3.50 | 2.50 |
| 12 | Wide | ANSI B18.22M | 13.57 | 13.30 | 44.00 | 43.38 | 3.50 | 2.50 |
| 14 | Narrow | ANSI B18.22M | 15.52 | 15.25 | 28.00 | 27.48 | 2.80 | 2.00 |
| 14 | Regular | ANSI B18.22M | 15.52 | 15.25 | 39.00 | 38.38 | 3.50 | 2.50 |
| 14 | Wide | ANSI B18.22M | 15.52 | 15.25 | 50.00 | 49.38 | 4.00 | 3.00 |
| 16 | Narrow | ANSI B18.22M | 17.52 | 17.25 | 32.00 | 31.38 | 3.50 | 2.50 |
| 16 | Regular | ANSI B18.22M | 17.52 | 17.25 | 44.00 | 43.38 | 4.00 | 3.00 |
| 16 | Wide | ANSI B18.22M | 17.52 | 17.25 | 56.00 | 54.80 | 4.60 | 3.50 |
| 20 | Narrow | ANSI B18.22M | 22.32 | 21.80 | 39.00 | 38.38 | 4.00 | 3.00 |
| 20 | Regular | ANSI B18.22M | 22.32 | 21.80 | 50.00 | 49.00 | 4.60 | 3.50 |
| 20 | Wide | ANSI B18.22M | 22.32 | 21.80 | 66.00 | 64.80 | 5.10 | 4.00 |
| 24 | Narrow | ANSI B18.22M | 26.12 | 25.60 | 44.00 | 43.00 | 4.60 | 3.50 |
| 24 | Regular | ANSI B18.22M | 26.12 | 25.60 | 56.00 | 54.80 | 5.10 | 4.00 |
| 24 | Wide | ANSI B18.22M | 26.12 | 25.60 | 72.00 | 70.80 | 5.60 | 4.50 |
| 30 | Narrow | ANSI B18.22M | 33.02 | 32.40 | 56.00 | 54.80 | 5.10 | 4.00 |
| 30 | Regular | ANSI B18.22M | 33.02 | 32.40 | 72.00 | 70.80 | 5.60 | 4.50 |
| 30 | Wide | ANSI B18.22M | 33.02 | 32.40 | 90.00 | 88.60 | 6.40 | 5.00 |
| 36 | Narrow | ANSI B18.22M | 38.92 | 38.30 | 66.00 | 64.80 | 5.60 | 4.50 |
| 36 | Regular | ANSI B18.22M | 38.92 | 38.30 | 90.00 | 88.60 | 6.40 | 5.00 |
| 36 | Wide | ANSI B18.22M | 38.92 | 38.30 | 110.00 | 108.60 | 8.50 | 7.00 |
Materials
- Plain washers are supplied in the finish your drawing specifies (self-colour, zinc-plated, or hot-dip galvanized to match the bolt assembly) — availability is confirmed at quotation. Match the washer series to the drawing callout, not to the bolt alone: two drawings for the same M12 bolt can legitimately specify regular or wide.
Ordering & documentation
Documents
Shipments of ANSI B18.22M Metric Plain Flat Washers (Narrow / Regular / Wide) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ANSI B18.22M Metric Plain Flat Washers (Narrow / Regular / Wide) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ANSI B18.22M Metric Plain Flat Washers (Narrow / Regular / Wide)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ANSI B18.22M Metric Plain Flat Washers (Narrow / Regular / Wide): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for ansi b18.22m metric plain flat washers (narrow / regular / wide) is 10,000 pieces (applies to the standard sizes and finishes for ansi b18.22m metric plain flat washers (narrow / regular / wide); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for ansi b18.22m metric plain flat washers (narrow / regular / wide) run 3–7 days. Quantities or variants of ansi b18.22m metric plain flat washers (narrow / regular / wide) outside the standard range are confirmed at quotation.
Storage & shipping
ANSI B18.22M Metric Plain Flat Washers (Narrow / Regular / Wide) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ansi b18.22m metric plain flat washers (narrow / regular / wide) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Narrow, regular or wide — which series do I need?
Follow the drawing. If you are the one writing it: narrow suits compact bosses and high-strength bolts where envelope matters; regular is the general default for bolted joints on steel or aluminium sheet; wide buys bearing area on soft or thin material, oversized or slotted holes, and gasketed joints where load spread prevents local crushing. All three slide over the same bolt — the inside diameter is identical per size — so the choice changes the OD envelope and the thickness stack only. The table here prints the max/min band for all three dimensions of all three series, so you can check the fit against your pocket or spigot before ordering.
Is ANSI B18.22M the same washer as ISO 7089?
They are different designations and this source does not print an equivalence table between them, so treat them as separate callouts: ISO 7089 (with ISO 7090 as the chamfered variant) is the designation European drawings and most non-US supply chains use, while ANSI B18.22M is the US-standard designation, and its printed series split (narrow/regular/wide) with per-dimension max/min limits is what this page tabulates. Do not substitute one print for the other on a controlled drawing without checking both standards' dimension tables for your specific size — and if your drawing says ANSI B18.22M, the ladder here is the matching series table to check the envelope against.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ANSI B18.22M Metric Plain Flat Washers (Narrow / Regular / Wide) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your ANSI B18.22M Metric Plain Flat Washers (Narrow / Regular / Wide)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support