ASTM F3394 Hardened Steel Backup and Reaction Washers

ASTM F3394/F3394M — Hardened Steel Backup and Reaction Washers, Inch and Metric Dimensions (F3394-23). The hardened-washer standard the RCSC 2025 Specification requires for backup and reaction washers in high-strength structural bolting, covering both conventional backup washers and the knurled reaction washers that couple with installation tools.

Last updated: 2026-11

Request a Quote

ASTM F3394 Hardened Steel Backup and Reaction Washers in an industrial setting
Illustrative image redrawn from real ASTM F3394 Hardened Steel Backup and Reaction Washers product references — not a photograph of stocked items.

Specifications

ASTM F3394 is the standard behind the hardened washers used in modern high-strength structural bolting. The RCSC Specification's 2025 edition added Section 2.5 to its bolting-component requirements: hardened backup and reaction washers shall meet ASTM F3394, and the washer type — Type 1 or Type 3 — shall be the same as the bolt it serves. Two washer forms fall under the standard. The backup washer is the conventional hardened plate washer placed under the installation or reaction end of the tool. The reaction washer is a defined F3394 part: a circular washer with a knurled surface on one side and a contoured outside diameter, designed to couple with an installation tool so the tool grips and reacts against the washer instead of chewing up the joint surface. RCSC Section 6.4 governs their use; F3394 washers are permitted even where washers are not required, and in slotted outer plies an F3394 washer is one of the approved means to completely cover the hole.

Standard ASTM F3394/F3394M-23 — Hardened Steel Backup and Reaction Washers, Inch and Metric Dimensions
Structural requirement RCSC Specification Section 2.5.1 (added 2025): hardened backup and reaction washers shall meet ASTM F3394
Type matching Washer type (Type 1 or Type 3) shall be the same as the bolt type (RCSC 2.5.2)
Reaction washer form Circular washer, knurled surface on one side, contoured outside diameter, designed to couple with an installation tool (definition per ASTM F3394-23)
Usage rules RCSC Section 6.4; permitted even where washers are not required (6.1); on a slotted outer ply, an F3394 or F436 washer (or plate washer) used to completely cover the hole (6.1.1)
Identification Backup and reaction washers appear among the required assembly marks of RCSC Fig. C-2.1
Galvanized connections 2025 research (Swanson and Rassati): F3394 washers on galvanized connection material satisfactory, but may be sensitive with thicker (>60 mil) coatings or paint systems — testing recommended there
Counterpart standard ASTM F436 hardened washers remain the general structural flat-washer standard; F3394 covers the backup/reaction forms tooling couples with

Materials

  • Hardened carbon steel (Type 1 — matches Type 1 medium-carbon/alloy bolts)
  • Weathering steel (Type 3 — matches Type 3 weathering bolts)

Ordering & documentation

Documents

Shipments of ASTM F3394 Hardened Steel Backup and Reaction Washers are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASTM F3394 Hardened Steel Backup and Reaction Washers orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASTM F3394 Hardened Steel Backup and Reaction Washers), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASTM F3394 Hardened Steel Backup and Reaction Washers: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for astm f3394 hardened steel backup and reaction washers is 10,000 pieces (applies to the standard sizes and finishes for astm f3394 hardened steel backup and reaction washers; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for astm f3394 hardened steel backup and reaction washers run 3–7 days. Quantities or variants of astm f3394 hardened steel backup and reaction washers outside the standard range are confirmed at quotation.

Storage & shipping

ASTM F3394 Hardened Steel Backup and Reaction Washers are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store astm f3394 hardened steel backup and reaction washers dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What is the difference between a backup washer and a reaction washer under F3394?

Both are hardened washers to the same standard, but the reaction washer is built to be gripped: it carries a knurled surface on one side and a contoured outside diameter designed to couple with an installation tool, so a tension-control or similar tool reacts against the washer rather than the joint. A backup washer is the conventional hardened washer placed under the loading end. The RCSC Specification requires both forms, when used, to meet ASTM F3394 and to be the same type (Type 1 or Type 3) as the bolt.

When are F3394 washers actually required in a structural joint?

The RCSC rules are specific. Washers are not required in snug-tightened, pretensioned or slip-critical joints with standard holes except where listed — but F3394 washers are permitted even where not required. They come into play when a slotted hole occurs in an outer ply, where an F3394 washer, an F436 washer or a plate washer must be used to completely cover the hole, and wherever the installation method relies on backup or reaction washers under Section 6.4. Beveled washers for slopes steeper than 1:20 remain an F436 requirement.

Can F3394 washers be used on hot-dip galvanized structural steel?

Yes, with one measured caveat. Research published with the RCSC 2025 edition (Swanson and Rassati) found F3394 washers on galvanized connection material perform satisfactorily, but noted they may be sensitive to use with thicker coatings or paint systems — above about 60 mil. If your galvanized or painted plies exceed that thickness, the research recommendation is to test the combination before committing to the installation method.

What is the MOQ and lead time for this washer type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this washer type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this washer type state?

State the series and the governing standard (ASTM F3394, inch or metric per F3394M), the bolt assembly it must serve (ASTM F3125 grade and Type 1 or Type 3), nominal bolt size, the washer form required (backup washer or reaction washer), surface and hardness requirements, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASTM F3394 Hardened Steel Backup and Reaction Washers inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your ASTM F3394 Hardened Steel Backup and Reaction Washers
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.