ASTM A193 Grade B7M Stud Bolts
Stud bolts and threaded rod in ASTM A193 Grade B7M — ANSI 4140/4142/4145 alloy steel, 1/4"–2-1/2" with a 125 ksi minimum tensile in the collected grade chart, and the hardness-controlled stud grade of the sour-service (NACE) pairing with A194 2HM heavy hex nuts.
Last updated: 2026-11
Specifications
B7M sits beside B7 in the same chemistry family — the collected grade chart rows list both as quenched-and-tempered alloy steel, B7M as ANSI 4140, 4142, or 4145 — but the two grades are not interchangeable callouts. B7M's role is set by hardness control: the collected pairing table puts A193 B7M studs with A194 2HM nuts in sour-service (NACE) assemblies, where the controlled hardness condition limits the risk of sulfide stress cracking rather than chasing the highest strength number. The stud format matches the rest of the A193 inch series — continuous-thread or double-end studs to ASME B18.31.2, threaded over the full length so the joint can be tensioned from either side. The collected grade chart tabulates B7M as a single row, 1/4" to 2-1/2" diameter with a 125 ksi minimum tensile — one row where B7 gets three size-banded tiers — so an RFQ should state diameter and condition explicitly and take the governing minimums from the mill certificate against the size of record.
| Standard | ASTM A193 Grade B7M (material); stud dimensions per ASME B18.31.2 |
|---|---|
| Material | ANSI 4140, 4142, or 4145 alloy steel (collected grade chart row) |
| Size coverage | 1/4" to 2-1/2" diameter (collected grade chart row) |
| Tensile strength, min | 125 ksi as printed in the collected grade chart (single 1/4"–2-1/2" row) — confirm the governing minimum against the size and condition of record |
| Hardness | Not tabulated in the collected chart for B7M — the grade's service role is a controlled-hardness condition, so hardness figures stay fail-closed here; take the result from the mill certificate |
| Service pairing | A193 B7M studs + A194 2HM heavy hex nuts — sour (NACE) service, controlled hardness (collected pairing table; see the A194 2HM page) |
| Corrosion protection | Coating systems per the service spec — the pairing-table context (sour service) requires material and hardness control, not just surface protection |
| Typical applications | Sour-service (NACE) flanged joints, refinery and process piping where controlled hardness is specified |
| Grade | Field | Recorded value |
|---|---|---|
| ASTM A193 B7M | Nominal size range | 1/4 in to 2-1/2 in |
| ASTM A193 B7M | Strength grade | ASTM A193 Grade B7M — tensile min 125 ksi; size range 1/4 in to 2-1/2 in |
Industry reference — figures as printed in the collected technical tables; availability confirmed per quotation.
Materials
- ANSI 4140, 4142, or 4145 alloy steel
B7M draws on the same alloy family — ANSI 4140, 4142, or 4145 — but the requirement chart sets a single 125 ksi minimum tensile across a 1/4 to 2-1/2 in range, without B7's larger-diameter steps.
B7M orders usually carry a stated hardness acceptance band; confirm the band and the certificate scope with the order rather than assuming B7's values apply.
Ordering & documentation
Documents
Shipments of ASTM A193 Grade B7M Stud Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASTM A193 Grade B7M Stud Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ASTM A193 Grade B7M Stud Bolts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ASTM A193 Grade B7M Stud Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for astm a193 grade b7m stud bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for astm a193 grade b7m stud bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for astm a193 grade b7m stud bolts run 3–7 days. High-strength and custom parts for astm a193 grade b7m stud bolts run 15–25 days. Quantities or variants of astm a193 grade b7m stud bolts outside the standard range are confirmed at quotation.
Storage & shipping
ASTM A193 Grade B7M Stud Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store astm a193 grade b7m stud bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What is the difference between A193 B7 and B7M studs?
Same chemistry family, different specification condition. The collected grade chart rows list both as quenched-and-tempered alloy steel (B7M as ANSI 4140/4142/4145), but B7M is the grade called out where hardness is controlled for sour-service (NACE) assemblies — the collected pairing table matches B7M studs with A194 2HM nuts, the hardness-controlled nut grade. A B7 callout cannot simply be substituted where the specification says B7M: the control exists to limit sulfide stress cracking, and the mill certificate must show the hardness result against the condition of record.
What should a B7M stud bolt RFQ line state?
The complete callout: stud bolt to ASME B18.31.2, diameter and length (B7M's collected chart row runs 1/4" to 2-1/2"), ASTM A193 Grade B7M explicitly — not B7 — with A194 2HM heavy hex nuts, coating per the service spec, and a mill certificate showing the hardness result. Where the governing tensile minimum for the size matters to the joint design, take it from the certificate and the specification of record rather than from a single chart row.
What is the MOQ and lead time for this stud grade?
The minimum order quantity for ASTM A193 B7M studs is 1,000–10,000 pieces depending on size. Stock items of ASTM A193 B7M ship in 3–7 days; high-strength and custom parts in 15–25 days. Confirm the exact schedule for ASTM A193 B7M stud orders against quantity and size mix at quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ASTM A193 Grade B7M Stud Bolts inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your ASTM A193 Grade B7M Stud Bolts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support