DIN 7992 T-Head Bolts with Large Head (M24 – M100)
DIN 7992 T-head bolts with large head, M24 to M100 — large foundation bolts whose oversized T-head drops into a channel or slot so the joint is tightened entirely from the nut side, tabulated per-size head geometry (k, h, o, q, r), minimum thread length b and pitch row p, steel classes 4.6 / 8.8 / 10.9, 8g external thread.
Last updated: 2026-11
Specifications
DIN 7992 is the big T-head bolt used where the bolt side of a joint is unreachable: the oversized T-shaped head drops into a cast channel, a slot in a foundation, or a clamping rail, and the whole joint is tightened from the nut side — which is why the source captions it among "foundation bolts with a larger T-shaped head". The collected table runs M24 to M100 and prints, per size, the pitch row p, the head height k (18 at M24 up to 75 at M100), the head rise h (the source's legend phrase is "Rise of the head length"), the fillet radius r (1,6 up to 5), the head thickness o — which tracks the nominal diameter one-to-one as printed — the minimum thread length b ("at least" 100 at M24 up to 350 at M100), and the head width q (65 up to 205). The Makings panel lists steel property classes 4.6, 8.8 and 10.9 with an 8g external thread; stainless, plastic and non-ferrous print "-" and are not claimed. The legend defines b, d, k, r, o, q and h but omits p; the p row's values match the standard coarse-pitch ladder for these sizes, and that reading is flagged rather than silently assumed. The ladder deliberately starts at M24 — this is the heavy end of the T-head family; anything below it, or a length beyond the tabulated minimum thread, is quoted per RFQ. For machine-tool T-slot bolting see the registered DIN 787 T-slot bolt page, which is a smaller, different standard.
| Standard / scope | DIN 7992 T-head bolts with large head (source table caption: "foundation bolts with a larger T-shaped head"), M24 to M100 (M24, M30, M36, M42, M48, M56, M64, M72, M80, M90, M100); equivalent norm printed by the source: PN 85061 |
|---|---|
| Head geometry | k (head height) 18 → 75; o (thickness of the head) 24 → 100, equal to the nominal d in every column as printed; q (head width) 65 → 205; r (radius) 1,6 → 5 |
| Head rise | h 18 → 30 ("Rise of the head length" [sic] per the source legend): rises to 30 at M42 and stays 30 through M100 |
| Thread | p row 3 (M24) → 6 (M72-M100), matching the standard coarse-pitch ladder (source legend omits p — flagged); minimum thread length b "at least" 100 → 350 across the ladder |
| Materials / thread class | Steel property classes 4.6, 8.8, 10.9 (source Makings panel); thread 8g external; stainless, plastic and non-ferrous print "-" — not claimed |
| Not tabulated | No mass row, no commercial length ladder beyond the b minimums, no finishes — confirmed at quotation (tenant supply range) |
| d | M24 | M30 | M36 | M42 | M48 | M56 | M64 | M72 | M80 | M90 | M100 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| p | 3 | 3,5 | 4 | 4,5 | 5 | 5,5 | 6 | 6 | 6 | 6 | 6 |
| k | 18 | 22 | 25 | 30 | 35 | 40 | 50 | 55 | 60 | 70 | 75 |
| h (Rise of the head length, as printed) | 18 | 20 | 25 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
| r | 1,6 | 1,6 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | 4 | 5 |
| o | 24 | 30 | 36 | 42 | 48 | 56 | 64 | 72 | 80 | 90 | 100 |
| b (length of the thread, at least) | 100 | 120 | 140 | 170 | 200 | 220 | 240 | 260 | 290 | 320 | 350 |
| q | 65 | 75 | 85 | 95 | 110 | 125 | 140 | 155 | 170 | 185 | 205 |
- The source legend does not define the p row; its printed values (3 at M24 rising to 6 at M72-M100) equal the standard metric coarse-pitch ladder for these sizes.
- Legend wording carried verbatim: "h - Rise of the head length" is the source's own phrasing for the head-rise row.
- o ("thickness of the head") equals the nominal d 1:1 in every column as printed (24 at M24 through 100 at M100) — carried verbatim, not adjudicated.
- The ladder runs M24-M100 only — the source tabulates no smaller sizes, no mass row and no commercial length ladder beyond the b minimum thread lengths; sizes, lengths and quantities outside the table are quoted per RFQ.
Materials
- Steel in property class 4.6, 8.8 or 10.9 per the collected source's Makings panel — 4.6 for light foundation duty, 8.8/10.9 where the clamp load matters; the source lists stainless, plastic and non-ferrous as "-", so they are not claimed and corrosion protection is handled by finish/coating confirmed at quotation; lengths and sizes outside the tabulated ladder per RFQ
Ordering & documentation
Documents
Shipments of DIN 7992 T-Head Bolts with Large Head (M24 – M100) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7992 T-Head Bolts with Large Head (M24 – M100) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 7992 T-Head Bolts with Large Head (M24 – M100)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 7992 T-Head Bolts with Large Head (M24 – M100): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 7992 t-head bolts with large head (m24 – m100) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 7992 t-head bolts with large head (m24 – m100); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7992 t-head bolts with large head (m24 – m100) run 3–7 days. High-strength and custom parts for din 7992 t-head bolts with large head (m24 – m100) run 15–25 days. Quantities or variants of din 7992 t-head bolts with large head (m24 – m100) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 7992 T-Head Bolts with Large Head (M24 – M100) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7992 t-head bolts with large head (m24 – m100) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How does a T-head bolt hold, and when is DIN 7992 the right pick?
The T-head needs no thread on the bolt side at all: the oversized T drops into a channel, slot or pocket that stops it from turning, so the joint is clamped entirely by running a nut along the shank. That makes DIN 7992 the standard pick for foundation and base-frame work — anchor points in concrete channels, machine beds, rails and clamping fixtures where the far side is cast in or inaccessible. Two boundaries from the collected table to respect: the ladder starts at M24 (this is the heavy end of the family — for machine-tool T-slot bolting in the small sizes, the registered DIN 787 T-slot bolt page is the different, smaller standard), and the head proportions are fixed per size — head width q runs 65 to 205 mm across the ladder, so the channel or slot taking the head must be sized for it. Where the head must slide before locking, the channel tolerances matter as much as the bolt; state both on the RFQ.
What does an RFQ for DIN 7992 need to state?
Thread size (d, M24-M100 — the whole tabulated ladder), shank length, and steel property class: 4.6, 8.8 or 10.9 per the collected panel, since the DIN 7992 table fixes geometry but the class sets the clamp load. State the finish or coating explicitly — the source tabulates none, and for a foundation bolt in concrete the corrosion protection decision (self-colour, zinc, hot-dip galvanized, or a sleeve) is a real quote variable. Note that b in the table is the minimum thread length ("length of the thread (at least)"): longer thread, reduced shank, or a special nut end are quoted to drawing. Any certificate requirement such as an EN 10204 3.1 mill report rounds out the RFQ.
The legend does not define the p row, and o equals the bolt size — which numbers do I trust?
Both quirks are the source's own print, carried here as printed. The p row (3 at M24 rising to 6 at M72-M100) matches the standard metric coarse-pitch ladder for these sizes — read it as the thread pitch your nut and tapping need, and flag it on the drawing if your application runs a fine pitch, because the source tabulates only this ladder. The o row equals the nominal d in every column (24 at M24 through 100 at M100) — read it as the head thickness for channel-depth checks, exactly as tabulated. Everything else is conventionally defined by the source legend: k head height, h the head rise ("Rise of the head length" in the source's own wording), r the fillet radius under the head, q the head width your channel must accept, and b the minimum thread length. Where a drawing checks a dimension against tolerance limits rather than the single printed value, confirm it against the manufacturer certificate at quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 7992 T-Head Bolts with Large Head (M24 – M100) inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your DIN 7992 T-Head Bolts with Large Head (M24 – M100)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support