DIN 548 Round Nuts with Set Pin Holes in Side (M2 – M10)
DIN 548 round nuts with set pin holes in side, M2 to M10 — small shaft-locking round nuts with a 6H internal thread and side pin holes, collected per-size table (bore da, hole dh, outside diameter dk, height m, hole depth t, pitch P) and a reference mass per 1000 units, steel / stainless A1 / brass.
Last updated: 2026-11
Specifications
DIN 548 is the small round nut that locks itself by being pinned: a low round nut whose side wall carries drilled pin holes, so once it is run up against a shoulder or another nut, a set pin or grubscrew dropped through a side hole bears on the shaft thread and stops the whole assembly from unwinding. Its legend says exactly what it is — dk is the "external diameter of the nut", m the "height of the nut", dh the "hole diameter" the pin runs in, t the "hole depth" — and the 6H internal thread confirms the nut side of the family (the source's Makings panel lists steel, stainless A1 and brass, with brass the soft-seating option). The collected table runs M2 through M10 and prints, per size, the pitch P, the bore limits da (min/max), the pin-hole bore and limits dh (min is the nominal size as printed), the outside diameter limits dk (max is nominal), the nut height m (max is nominal, "nomial size" in the source's own spelling), the hole depth limits t, and a reference mass per 1000 units at 7,85 kg/dm3. The ladder deliberately tops out at M10 — above that, this catalog's larger round-nut pages (DIN 981, DIN 1816) take over, and anything between is quoted to drawing. The source's legend also names "do - diameter chamfer", for which no column prints on the table; it is not invented here. Where the min./max. sub-headers print inline in the source's letter rows they are carried in this table's row labels exactly as printed, including the "nomial" spelling in the m row.
| Standard / scope | DIN 548 round nuts with set pin holes in side, M2 to M10 (thread d is the size ladder itself: M2, M2,5, M3, M3,5, M4, M5, M6, M8, M10); equivalent norm printed by the source: PN 82466 |
|---|---|
| Bore limits | da min 2 → 10; da max 2,3 → 10,8 across the ladder |
| Pin hole | dh (min = nominal size as printed) 1 → 3,5; dh max 1,14 → 3,68; hole depth t min 1 → 3,8, t max 1,4 → 4,3 — the set-pin bore and its depth per size |
| Outside diameter | dk (max = nominal size as printed) 5,5 → 22; dk min 5,2 → 21,48 |
| Nut height | m (max = "nomial size" [sic — nominal] as printed) 2 → 8; m min 1,75 → 7,64 |
| Pitch | P 0,4 (M2) → 1,5 (M10), per the source row |
| Reference mass | Source "Mass (7,85 kg/dm3), in kg per 1000 units / approximately": 0,31 → 18,7 kg per 1000 by size |
| Materials / thread | Steel; stainless A1; brass (source "Non Ferrous"); thread 6H internal (source Makings panel). Plastic prints "-" — not claimed; finishes per RFQ |
| d | M2 | M2,5 | M3 | M3,5 | M4 | M5 | M6 | M8 | M10 | |
|---|---|---|---|---|---|---|---|---|---|---|
| P | 0,4 | 0,45 | 0,5 | 0,6 | 0,7 | 0,8 | 1 | 1,25 | 1,5 | |
| da (min., as printed) | 2 | 2,5 | 3 | 3,5 | 4 | 5 | 6 | 8 | 10 | |
| da (max.) | 2,3 | 2,9 | 3,45 | 4 | 4,6 | 5,75 | 6,75 | 8,75 | 10,8 | |
| dh (min= nominal size, as printed) | 1 | 1,2 | 1,5 | 1,5 | 1,5 | 2 | 2,5 | 3 | 3,5 | |
| dh (max.) | 1,14 | 1,34 | 1,64 | 1,64 | 1,64 | 2,14 | 2,64 | 3,14 | 3,68 | |
| dk (max.=nominal size, as printed) | 5,5 | 7 | 8 | 9 | 10 | 12 | 14 | 18 | 22 | |
| dk (min.) | 5,2 | 6,64 | 7,64 | 8,64 | 9,64 | 11,57 | 13,57 | 17,57 | 21,48 | |
| m (max.=nomial size, as printed) | 2 | 2,2 | 2,5 | 3 | 3,5 | 4,2 | 5 | 6,5 | 8 | |
| m (min.) | 1,75 | 1,95 | 2,25 | 2,75 | 3,2 | 3,9 | 4,7 | 6,14 | 7,64 | |
| t (min., as printed) | 1 | 1,3 | 1,3 | 1,8 | 1,8 | 2,3 | 2,8 | 3,3 | 3,8 | |
| t (max.) | 1,4 | 1,7 | 1,7 | 2,2 | 2,2 | 2,7 | 3,2 | 3,8 | 4,3 | |
| Mass (7,85 kg/dm3), in kg per 1000 units / approximately | 0,31 | 0,55 | 0,79 | 1,21 | 1,78 | 2,96 | 4,7 | 9,95 | 18,7 |
- Sub-header cells print inline as the second cell of the five letter rows (da/min., dh/min= nominal size, dk/max.=nominal size, m/max.=nomial size, t/min. — 11 cells against the 10-cell header; crushed sub-header rowspan); attribution positional-as-printed, kept in row labels.
- Source typo "nomial size" [sic — nominal] in the m row sub-header; carried verbatim in the row label, not reproduced in page prose.
- Legend lists "do - diameter chamfer" with no printed column in the table — not invented.
- Ladder tops out at M10 — larger sizes are not tabulated by this source; quoted per RFQ.
Materials
- Steel, stainless A1 or brass, per the collected source's Makings panel (brass for soft-seated or corrosion-light duty); the source lists plastic as "-", so it is not claimed; finish confirmed at quotation (tenant supply range)
Ordering & documentation
Documents
Shipments of DIN 548 Round Nuts with Set Pin Holes in Side (M2 – M10) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 548 Round Nuts with Set Pin Holes in Side (M2 – M10) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 548 Round Nuts with Set Pin Holes in Side (M2 – M10)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 548 Round Nuts with Set Pin Holes in Side (M2 – M10): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 548 round nuts with set pin holes in side (m2 – m10) is 10,000 pieces (applies to the standard sizes and finishes for din 548 round nuts with set pin holes in side (m2 – m10); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 548 round nuts with set pin holes in side (m2 – m10) run 3–7 days. Quantities or variants of din 548 round nuts with set pin holes in side (m2 – m10) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 548 Round Nuts with Set Pin Holes in Side (M2 – M10) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 548 round nuts with set pin holes in side (m2 – m10) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How does DIN 548 lock, and when do I pick it over a lock nut or a round nut with slots?
It locks by pin, not by friction. The side wall of DIN 548 carries drilled holes sized in the table (dh 1 → 3,5, depth t up to 4,3): run the nut up against its shoulder, then drop a set pin or grubscrew through a side hole so it bears on the shaft thread — the assembly can no longer unwind regardless of vibration. That makes it the right choice where a nyloc would creep (heat), where a tab washer cannot be reached (tight axial space), or where you want a lock that is fully reversible by pulling one pin. Against DIN 981 / DIN 1816 slotted round nuts — this catalog's larger round-nut pages — DIN 548 is the small-bore sibling: its ladder stops at M10 and its drive is the side holes themselves rather than face slots, so tightening is done with a peg spanner or a drift on the pin holes. If your shaft thread runs past M10, quote from those larger round-nut pages instead.
What does an RFQ for DIN 548 need to state?
Thread size (d, M2-M10 — the whole tabulated ladder) and material: steel, stainless A1 or brass per the collected panel. State the mating shaft thread, because the set pin bears directly on it — a pin whose point meets a thread root of the wrong class will not lock cleanly — and any certificate requirement such as an EN 10204 3.1 mill report. Quantity and finish round out the RFQ. The table on this page gives the numbers your mating drawing needs: bore da for the shaft fit, dk for clearance checks, m for stack height, and dh/t for the set pin you will drive the lock with. Sizes above M10 are not tabulated by the collected source and are quoted to drawing.
The table prints min./max. sub-rows with phrases like "max.=nomial size" — what do I quote from?
Quote the limit your drawing checks. The source prints each letter as a pair of limit rows, and it is explicit about which one is the nominal: dh's min row ("min= nominal size") and dk's max row ("max.=nominal size") are the nominal values — the other limit is the tolerance excursion. The m row carries the source's own spelling "nomial size" [sic]; this page keeps it verbatim in the table label rather than silently correcting it, and the same value is the nominal nut height. Practical reading: the bore da is what the shaft thread must fall inside (min/max), dh/t are what your set pin must fit into (nominal bore, depth limits), and the mass row is the source's approximate figure per 1000 units at 7,85 kg/dm3 for shipping estimates — not a quoting weight, and carried as printed.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 548 Round Nuts with Set Pin Holes in Side (M2 – M10) inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 548 Round Nuts with Set Pin Holes in Side (M2 – M10)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support