ISO 7043 / ISO 12125 Flange Lock Nuts (Nylon Insert)
Hex flange nuts with nylon insert, ISO 7043 / ISO 12125 — M5 to M20 on the source ladder with the combined coarse/fine print carried verbatim, flange bearing diameter (dc) and insert gripping length (mw) tabulated per size.
Last updated: 2026-11
Specifications
These are the locking counterpart of the standard flange nut: a hex nut with an integrated flange that spreads the clamp load over the bearing surface without a separate washer, plus a nylon collar at the top of the thread that gives prevailing-torque lock the same way a nyloc does. The flange does the seating work of a washer — useful on oversized or slotted holes and on softer base material — while the insert holds the nut against vibration, so the combination suits assemblies where both a large bearing face and vibration resistance are wanted without stacking separate hardware. The source ladder prints the ISO 7043 designation at M5 and the combined "ISO 7043 / ISO 12125" print from M8 upward, with the thread-series column carrying the source's own combined coarse/fine notation — so a specific pitch is read from the pitch column and confirmed at quotation rather than split out of the table. One reading note: the recovered ladder runs M5 through M20 only, with M6, M12, M18 and everything above M20 not tabulated by the source; those sizes are a quotation question here, not a table lookup.
| Standard / scope | ISO 7043 (printed at M5) and ISO 7043 / ISO 12125 (printed combined from M8 to M20) — hex flange nuts with non-metallic (nylon) insert; the combined print is carried verbatim from the source's Standard column |
|---|---|
| Size range | M5 to M20 on the source ladder; M6, M12, M18 and sizes above M20 are not tabulated by the source (gaps carried, not interpolated) |
| Product grade | grade A printed through M16, grade B at M20 (per the source table's Product Grade column) |
| Flange bearing face | dc max and dw min printed per size (e.g. dc 21.8 / dw 19.6 at M10, dc 42.8 / dw 39.9 at M20) — the washer-replacement bearing diameter of the integrated flange |
| Locking element | nylon insert with effective gripping length mw min tabulated per size (2.5 at M5 to 10.7 at M20) — the prevailing-torque collar; the height band h max/min is printed alongside (11.1/10.4 at M8 to 24.8/22.7 at M20) |
| Thread series | coarse at M5; from M8 the source prints "coarse / fine" combined with pitch values for both series in the pitch column (e.g. 1.25 / 1 at M8, 2.5 / 1.5 at M20) — a specific pitch requirement is confirmed at quotation |
| Anomaly note | the source calculator dump repeated the M5 and M8 rows verbatim; the duplicates were collapsed (values identical) and the M6/M12/M18 gaps are carried as printed |
| Not tabulated | sizes above M20, prevailing-torque values, insert temperature limits, MOQ, lead time and price — the last three are confirmed at quotation |
| Thread size | Product grade | Standard | Thread series | Pitch (mm) | c min | da max | da min | dc max | dw min | e min | h max | h min | m min | mw min | s max | s min | r max |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 | A | ISO 7043 | coarse | 0.8 | 1 | 5.75 | 5.00 | 11.8 | 9.8 | 8.79 | 7.10 | 6.52 | 4.7 | 2.5 | 8.00 | 7.78 | 0.3 |
| 8 | A | ISO 7043 / ISO 12125 | coarse / fine | 1.25 / 1 | 1.2 | 8.75 | 8.00 | 17.9 | 15.8 | 14.38 | 11.1 | 10.4 | 7.64 | 4.6 | 13.00 | 12.73 | 0.48 |
| 10 | A | ISO 7043 / ISO 12125 | coarse / fine | 1.5 / 1 / 1.25 | 1.5 | 10.8 | 10.0 | 21.8 | 19.6 | 16.64 | 13.5 | 12.8 | 9.64 | 5.6 | 15.00 | 14.73 | 0.6 |
| 14 | A | ISO 7043 / ISO 12125 | coarse / fine | 2 / 1.5 | 2.1 | 15.1 | 14.0 | 29.9 | 27.6 | 23.36 | 18.2 | 16.9 | 13.3 | 7.7 | 21.00 | 20.67 | 0.88 |
| 16 | A | ISO 7043 / ISO 12125 | coarse / fine | 2 / 1.5 | 2.4 | 17.3 | 16.0 | 34.5 | 31.9 | 26.75 | 20.3 | 19.0 | 15.3 | 8.9 | 24.00 | 23.67 | 0.96 |
| 20 | B | ISO 7043 / ISO 12125 | coarse / fine | 2.5 / 1.5 | 3 | 21.6 | 20.0 | 42.8 | 39.9 | 32.95 | 24.8 | 22.7 | 18.7 | 10.7 | 30.00 | 29.16 | 1.2 |
Materials
- Nylon-insert flange lock nuts order in steel (typically zinc-plated for the common grades, with the insert as a separate polymer ring) — the source page is a dimension reference and does not print material/finish stocks; state thread size and pitch, grade A or B preference, and any insert temperature requirement on the RFQ. Commercial terms (MOQ, lead time, price) are confirmed at quotation.
Ordering & documentation
Documents
Shipments of ISO 7043 / ISO 12125 Flange Lock Nuts (Nylon Insert) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7043 / ISO 12125 Flange Lock Nuts (Nylon Insert) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 7043 / ISO 12125 Flange Lock Nuts (Nylon Insert)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ISO 7043 / ISO 12125 Flange Lock Nuts (Nylon Insert): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for iso 7043 / iso 12125 flange lock nuts (nylon insert) is 10,000 pieces (applies to the standard sizes and finishes for iso 7043 / iso 12125 flange lock nuts (nylon insert); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7043 / iso 12125 flange lock nuts (nylon insert) run 3–7 days. Quantities or variants of iso 7043 / iso 12125 flange lock nuts (nylon insert) outside the standard range are confirmed at quotation.
Storage & shipping
ISO 7043 / ISO 12125 Flange Lock Nuts (Nylon Insert) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7043 / iso 12125 flange lock nuts (nylon insert) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When is a flange lock nut the better pick over a plain nyloc plus a washer?
Functionally the pair and the flange nut deliver the same two things — bearing area and prevailing-torque lock — so the choice is mostly assembly economy and hole conditions. The flange nut is one part instead of two, it cannot be assembled washer-less by mistake, and its fixed bearing diameter (dc max 21.8 mm at M10 versus the nut's 16.6-ish across-corners envelope) is centered on the nut, which helps on slots or oversize holes where a separate washer could pivot away. The trade-offs: the flange is part of the nut, so there is no freedom to upsize the washer independently, and on very soft bases a large-diameter washer may still out-perform the printed flange. The table on this page prints the flange bearing band (dc/dw) and the insert gripping length (mw min) per size so both the seating check and the lock margin can be run before ordering.
What does the combined "ISO 7043 / ISO 12125" print mean for ordering?
ISO 7043 and ISO 12125 are the two governing prints for this nut form in coarse and fine pitch respectively, and the source ladder carries them combined from M8 upward — the same row serves both thread series, with the pitch column showing the coarse and fine values side by side (for example 1.5 / 1 / 1.25 at M10, where 1.25 is the fine pitch of the M10 fine series and 1 the extra-fine). Practically: read the geometry (flange diameter, height, insert length) from the shared columns, and treat the exact pitch as a stated requirement on the RFQ — quoting a fine-pitch flange lock nut off a coarse-pitch assumption is the classic ordering error here. The Standard column on this page reproduces the source's combined print verbatim rather than splitting it, so the table stays traceable to what the source actually prints.
Why does the table stop at M20, and what should a larger requirement do?
The source calculator ladder was recovered only through M20 — M22, M24, M27, M30 and larger are simply not in the print, alongside the smaller gaps at M6, M12 and M18. Those sizes are disclosed as gaps rather than filled from memory or another reference, because values quoted from a different source would not carry the same provenance as the rest of the table. If a requirement falls above M20, state the size, pitch and joint conditions on the RFQ: large nylon-insert flange nuts exist in the market, but the confirming dimensions should come back with the offer rather than be assumed from this page.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 7043 / ISO 12125 Flange Lock Nuts (Nylon Insert) inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your ISO 7043 / ISO 12125 Flange Lock Nuts (Nylon Insert)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support