DIN 70852 Locknuts (M10x1 – M80x1,5)

DIN 70852 locknuts — thin notched (knurled-face) locknuts in fine threads M10x1 to M80x1,5 for locking against shoulders and tab washers on shafts, bearings and instrument builds, with the full a/b/c/d2/d3/r1/Groove geometry in the source's two-thread-band layout.

Last updated: 2026-11

Request a Quote

DIN 70852 Locknuts (M10x1 – M80x1,5) in an industrial setting
Illustrative image redrawn from real DIN 70852 Locknuts (M10x1 – M80x1,5) product references — not a photograph of stocked items.

Specifications

DIN 70852 is the locknut of the precision-shaft world: a thin nut with notched (knurled) faces on its flats, made to be bent into a groove or cinched against a tab washer so it cannot back off a threaded shaft or bearing shoulder. The fine-pitch ladder is the giveaway — M10x1 at the bottom end and x1,5 pitch from M12 up through M80x1,5 — because a locknut works by sitting hard against its mating face, and fine pitch lets you bring it up in small, precise increments without starving the thread engagement. The collected table runs the whole designation in the source's own two-band layout: M10x1 to M38x1,5 in the first band and M40x1,5 to M80x1,5 in the second, with height a 5 to 10, notch width b 4,5 to 11, external diameter d2 20 to 100, the d3 (spacing) row 16 to 91, and the Groove row stepping 4 to 6 mid-band. Materials per the Makings panel: steel, thread tolerance 6H; stainless and non-ferrous print "-" and are quotation items. Two reading notes: the source's legend defines "r2 - radius" but the table row prints r1 (carried verbatim), and the Groove row has no legend entry at all — see the FAQs before machining the matching groove on a shaft.

Standard / scope DIN 70852 locknuts (source title "DIN 70852 - Locknuts"; "Current norm: DIN 70852"), fine-pitch threads M10x1 through M80x1,5 (x1 pitch at M10, x1,5 from M12 up)
Nut height (a) 5 (M10x1) to 10 (M75x1,5 / M80x1,5); band steps 5 → 6 → 7 → 8 → 9 → 10 across the ladder
Notch width (b) 4,5 (small sizes) to 11 (M60x1,5 up) — the notched/knurled faces are the locking feature against a groove or tab washer
External diameter (d2) 20 (M10x1) to 100 (M80x1,5); d3 (spacing, the source's own legend wording) 16 to 91
Groove depth (c) / radius c 1,8 (M10x1) to 4,3 (M60x1,5 up); radius row printed r1 (0,3 throughout) while the legend names r2 — carried verbatim; Groove row 4 (band 1 and to M42x1,5) then 6 (M45x1,5 onward)
Thread tolerance 6H per the source Makings panel
Materials Steel per the Makings panel; stainless, plastic, non-ferrous print "-" — not claimed
Not tabulated No proof-load or tightening torque ratings, no hardness spec, no finishes — confirmed at quotation
DIN 70852 locknuts — thread band 1 (M10x1 to M38x1,5)dimensions in mm; source header spelling "thread 6H" kept as printed; attribute rows transposed (attributes as rows, threads as columns) exactly as the source prints
thread 6HM 10x1M 12x1,5M 14x1,5M 16x1,5M 18x1,5M 20x1,5M 22x1,5M 24x1,5M 26x1,5M 28x1,5M 30x1,5M 32x1,5M 35x1,5M 38x1,5
a56666677777888
b4,54,54,55,55,55,56,56,56,56,56,5777
c1,81,81,82,32,32,32,82,82,82,82,83,33,33,3
d22022242830323638404244485054
d31618202325273032343638414347
r10,30,30,30,30,30,30,30,30,30,30,30,30,30,3
Groove44444444444444
  • legend defines "r2 - radius" but the table row prints r1 — the source's own legend/label mismatch, carried verbatim.
  • Row 7 (Groove): "Groove" row has no legend entry; values step 4 (to M32x1,5) -> 4 (M35/M38) as printed — verify against the standard document before machining the notch.
DIN 70852 locknuts — thread band 2 (M40x1,5 to M80x1,5)dimensions in mm; source header spelling "Thread 6H" (capital T) kept as printed; the source's two trailing empty cells per row are padding, not data
Thread 6HM 40x1,5M 42x1,5M 45x1,5M 48x1,5M 50x1,5M 52x1,5M 55x1,5M 60x1,5M 65x1,5M 70x1,5M 75x1,5M 80x1,5
a88888889991010
b78888881111111111
c3,33,83,83,83,83,83,84,34,34,34,34,3
d25660626568707580859095100
d3495254576062677176818691
r10,30,30,30,30,30,30,30,30,30,30,30,3
Groove446666666666
  • Row 7 (Groove): "Groove" steps 4 (to M42x1,5) -> 6 (M45x1,5 onward) mid-band as printed; no legend entry defines the row.
  • the source prints each band-2 row with two trailing empty cells (padding to band-1 width) — rendered without the empty padding columns.

Materials

  • The source tabulates steel only (thread tolerance 6H), and that is how the designation is normally bought: a hardened-enough carbon-steel nut that takes the bending of its notched faces without cracking, locking either into a shaft groove or against a DIN 70952-style tab washer. Stainless and non-ferrous print "-" on the source page, so they are quoted per RFQ rather than claimed — relevant for food, marine or instrument work where the shaft is stainless and a galvanic pair matters. State the mating arrangement on the RFQ (groove-bent or tab-washer), because it decides whether the Groove row's 4 or 6 value and the notch width b are the binding dims.

Ordering & documentation

Documents

Shipments of DIN 70852 Locknuts (M10x1 – M80x1,5) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 70852 Locknuts (M10x1 – M80x1,5) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 70852 Locknuts (M10x1 – M80x1,5)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 70852 Locknuts (M10x1 – M80x1,5): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 70852 locknuts (m10x1 – m80x1,5) is 10,000 pieces (applies to the standard sizes and finishes for din 70852 locknuts (m10x1 – m80x1,5); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 70852 locknuts (m10x1 – m80x1,5) run 3–7 days. Quantities or variants of din 70852 locknuts (m10x1 – m80x1,5) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 70852 Locknuts (M10x1 – M80x1,5) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 70852 locknuts (m10x1 – m80x1,5) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How does a DIN 70852 locknut actually lock — and what is the Groove row for?

Two arrangements, one nut. In the groove arrangement, the notched (knurled) faces on two of the flats are bent down into a groove cut in the shaft — the Groove row in the table (4 for the smaller sizes, 6 from M45x1,5) is the depth that mating groove needs; the nut is only bent once at assembly and is meant for low removal counts. In the tab-washer arrangement, a tab washer sits between nut and face and one of its tabs folds into a notch on the nut's face — nothing on the shaft is machined. The source gives the Groove row no legend entry, so treat its values as the standard's tabulated groove depths and verify against the standard document before cutting the shaft groove — the notch width b is the other dimension your bending tool has to match.

The legend says r2 but the table row is labeled r1 — which is the radius?

They are the same feature, named inconsistently by the source: the legend defines "r2 - radius" while the tabulated row prints r1 (0,3 at every thread). This page carries the mismatch verbatim rather than silently renaming either side. Practically it is a 0,3 mm chamfer/rounding radius on the nut's edges — a finishing dimension, not a sizing one; nothing in the ordering or mating decision depends on it. If a drawing checker needs the radius named consistently, cite the standard document, not this page.

DIN 70852 locknut vs DIN 986/985 nyloc — when is which right?

Different jobs. A nyloc locks by thread friction and works anywhere a normal-height nut runs; a DIN 70852 locknut locks by positive engagement — metal bent into metal — and is the choice where heat, vibration or adjustment duty would cook off or wear out a nylon insert (bearing adjustment on spindles, fixture stacks, shaft collars on hot equipment). It is also much thinner (a runs 5 to 10 across the whole M10-M80 ladder), so it fits where a full-height nut would bottom out or waste shaft thread. The flip side: it needs the mating groove or tab washer to do anything at all, and it is not a high-tensile clamping nut — order a DIN 6924-style locknut or a plain thick nut with a separate locking device for structural bolting.

What should an RFQ for DIN 70852 locknuts state?

Thread designation with pitch — M20x1,5 style, never a bare "M20", since the whole ladder is fine pitch (and M10 is x1, not x1,5) — plus the locking arrangement (groove-bent or tab-washer mating), material confirmation (steel is the tabulated line; stainless is a quotation item), quantity per size, and any hardness or certificate requirement. If your drawing pairs the nut with a tab washer, name that standard too so the pair ships runnable. Anything outside the table — stainless, finishes, threads beyond M80x1,5 or coarse-pitch variants — is confirmed at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 70852 Locknuts (M10x1 – M80x1,5) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 70852 Locknuts (M10x1 – M80x1,5)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.