DIN 967 Cross Recessed Pan Head Screws with Collar
Cross recessed pan head screws with collar per DIN 967 — M3 to M8 in steel class 4.8, thread 6g. The pan head with a built-in flange: more bearing surface under the head without a separate washer.
Last updated: 2026-11
Specifications
The collar under this pan head is the whole idea: a flange moulded into the head seat spreads the clamp load over a wider bearing circle, so the screw resists pull-through in softer substrates and needs no separate washer in high-volume assembly. The collected standard table runs M3 through M8 in steel class 4.8, thread tolerance 6g. At M4 the head measures 10 mm across (k 3.05 mm) with the collar taking it to a c of 1.1 mm, driven by a No. 2 cross recess (Type H depth ≈4.6 mm, Type Z 4.3 mm); at M5 the seat grows to 11.5 mm. The collected table lists DIN 967 itself as the current designation — no ISO supersession appears in the source. Choose it over the plain pan head (DIN 7985) when the assembly line would otherwise feed a washer as a second part, and over the hex-flange bolt family when the drive is a screwdriver, not a wrench.
| Standard | DIN 967 — cross recessed pan head screw with collar; the collected table lists DIN 967 as the current designation |
|---|---|
| Size range | M3 – M8 |
| Dimensions at M4 | dk (head diameter) nominal=max 10 mm (min 9.42 mm); k (head height) nominal=max 3.05 mm (min 2.75 mm); c (collar) max 1.1 mm; da max 4.7 mm; cross recess Type H size 2, m 4.6 mm; P 0.7 mm; b min 38 mm |
| Drive | Cross recess types H and Z, sizes 1–4 by thread |
| Strength / materials | Steel 4.8 |
| Thread | 6g |
Materials
- Steel
Ordering & documentation
Documents
Shipments are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The fastener family (DIN 967 Cross Recessed Pan Head Screws with Collar) plus the standard designation from your drawing — DIN / ISO / JIS / ASTM / ANSI, or a drawing for custom parts.
- Size (diameter and length), thread type (metric or inch), property class or grade, and coating or finish.
- Quantity per size and your target delivery date.
- Destination country, and any required documents (for example a mill test certificate) so the quote includes them.
Sample & supply
Minimum order quantity is 10,000 pieces. Stock items run 3–7 days. Quantities or variants outside the standard range are confirmed at quotation.
Storage & shipping
Parts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 967 with collar or DIN 7985 plain pan head — which one for my assembly?
Decide by whether the joint needs the washer function. The DIN 967 collar spreads the clamp over a wider bearing circle, which resists pull-through in plastics, sheet and painted surfaces and removes a washer from the feeding sequence — one part instead of two on the assembly line. The plain pan head of DIN 7985 is the choice when the mating part has its own bearing boss or a washer is already specified for other reasons, and it opens the makings list (A2/A4 stainless, brass, plastic) that the collected DIN 967 table does not carry. Both drive with the same cross recess tooling over overlapping M3–M8 / M1.6–M10 ranges.
What is the MOQ and lead time for these screws?
Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for these screws state?
State the standard designation (for example DIN 914, DIN 915, DIN 7981/7982/7983 — or the ISO designation your drawing prints), thread or tapping size, length or head dimension, strength class or material (such as 45H, 4.8, A2-70, A4-80 or brass), finish (black oxide, zinc plated, or plain), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your inquiry
- ✓ Standard and property class (e.g. DIN 912, ISO 4762, class 8.8) — or a drawing for custom parts.
- ✓ Sizes, lengths and thread type (metric or inch).
- ✓ Quantity per size and your target delivery date.
- ✓ Destination country, plus any coating or finish requirement.
- ✓ Any documents you need with the shipment (e.g. mill test certificate) so the quote includes them.
- ✓ Your inquiry goes straight to the factory team by email and gets a reply within 24 hours.
- ✓ Factory-direct pricing
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support