ISO 7435 Slotted Set Screws, Long Cone Point

Documents

Shipments are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

• The fastener family (ISO 7435 Slotted Set Screws, Long Cone Point) plus the standard designation from your drawing — DIN / ISO / JIS / ASTM / ANSI, or a drawing for custom parts.
• Size (diameter and length), thread type (metric or inch), property class or grade, and coating or finish.
• Quantity per size and your target delivery date.
• Destination country, and any required documents (for example a mill test certificate) so the quote includes them.

Sample & supply

Minimum order quantity is 10,000 pieces. Stock items run 3–7 days. Quantities or variants outside the standard range are confirmed at quotation.

Storage & shipping

Parts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

The source calls this "Slotted set screws and pins" — is it a screw or a pin, and when is the long point worth specifying?

It is a set screw — the collected columns (dp point diameter, n slot, t recess depth, z point length over a length ladder with masses) are a set-screw attribute set, and the "and pins" in the source title is its wording, disclosed here rather than silently adopted. The designation itself is unambiguous. On when the long point wins over the ISO 7434 ordinary cone: specify the long cone when the point must engage a pre-drilled recess or reach past a shoulder — the z row is the extra point length that does that engaging (0,8 → 6 across the range, so the mating recess depth must be planned to match), while the shorter ISO 7434 point is the right choice for direct-into-surface indexing where there is no recess to seat in. Two cells on this page are verbatim-flagged in the table (n max 0,26 at M 8, t max 10,5 at M 3) because they break the numeric pattern of their rows; if your order lands on those sizes, confirm the printed values per RFQ before quoting the drawing. Sibling designations ISO 7434 and ISO 7436 are in this catalog with their own ladders.