DIN 5914 Sleeper Screws (Form A / Form B, d1 22 – 26)
DIN 5914 sleeper screws — rail-fastening screw spikes in form A and form B, tabulated over seven printed rows at d1 22/24/26 with shank, head and shoulder geometry (d2 42-54, k 35-39) plus per-piece weight 0,456-0,702 kg, property classes 4.6/5.8/8.8 as printed.
Last updated: 2026-11
Specifications
DIN 5914 is the sleeper screw of rail fastening: a large-diameter screw spike driven into a pre-drilled sleeper (concrete or timber) to hold the rail through an elastic clip or shoulder. This is heavy-niche hardware — the buyers are track constructors, maintenance depots and rail-component distributors, not general MRO — and the printed grid reflects that: only three shank diameters (d1 22, 24, 26) exist in the table, each with a short length ladder (l1 130-165 as printed), and the form letter in the first column splits the series into form A and form B heads with different head diameters (d2 42/44/50/54) and head radii (r1 32/40). The columns carry more than the legend explains: the source legend defines only k (head height), d2 (head diameter), D1 (shank diameter — printed as d1 in the grid), d3 (minor thread diameter) and r1 (head radius), while d4, f2, f3, f4, l2, l3, z, h and t are printed positionally with no legend entry — this page transcribes them verbatim and flags the gap rather than assigning meanings. Property classes as printed: steel 4.6, 5.8, 8.8 only; a stainless sleeper screw is a quotation item, not a catalogue line. Order by form letter AND d1 AND l1 — two rows that share a diameter are different parts once the head form or length differs.
| Standard / scope | DIN 5914 sleeper screws (rail fastening screw spikes), form A and form B as printed in the "From" column |
|---|---|
| Shank diameters (d1) | 22, 24, 26 — three printed diameters over seven rows |
| Lengths (l1) | 130 / 140 / 150 / 165 as printed per row — a short ladder, not a full length series |
| Head geometry | d2 42 / 44 / 50 / 54; k 35 / 39; r1 32 / 40 (form A vs form B differ in d2 and r1) |
| Weight (as printed) | 0,456 to 0,702 kg/pc per row, decimal commas verbatim |
| Materials (as printed) | Steel: 4.6, 5.8, 8.8; Stainless: -; Plastic: -; Non Ferrous: -; Thread: - (source makings block verbatim) |
| Not legended | The source legend defines only k, d2, D1, d3, r1 — the printed columns d4, f2, f3, f4, l2, l3, z, h, t carry no legend entry and are transcribed positionally as captured |
| From | d1 | l1 | d2 | d3 | d4 | f2 | f3 | f4 | k | l2 | l3 | r1 | z | h | t | weight kg/pc |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 22 | 140 | 42 | 15 | 9 | 9,7 | 3,6 | - | 35 | 20 | 27 | 32 | 7 | 11 | 3,5 | 0,456 |
| A | 22 | 165 | 42 | 15 | 9 | 9,7 | 3,6 | - | 35 | 45 | 27 | 32 | 7 | 11 | 3,5 | 0,531 |
| B | 22 | 140 | 50 | 15 | 9 | 9,7 | 2,3 | 2,5 | 35 | 20 | 27 | 40 | 7 | 11 | 3,5 | 0,498 |
| B | 22 | 150 | 50 | 15 | 9 | 9,7 | 2,3 | 2,5 | 35 | 30 | 27 | 40 | 7 | 11 | 3,5 | 0,528 |
| A | 24 | 150 | 44 | 16 | 10 | 11 | 4 | - | 35 | 25 | 30 | 32 | 8 | 12,5 | 4 | 0,545 |
| B | 26 | 130 | 54 | 18 | 10 | 13,1 | 4 | 2,5 | 39 | 20 | 35 | 40 | 8 | 13,5 | 4 | 0,654 |
| B | 26 | 150 | 54 | 18 | 10 | 13,1 | 4 | 2,5 | 39 | 20 | 35 | 40 | 8 | 13,5 | 4 | 0,702 |
- the source legend defines only k, d2, D1, d3 and r1 — the printed columns d4, f2, f3, f4, l2, l3, z, h and t carry no legend entry and are transcribed positionally as captured.
- "-" cells in the f4 column are no-variant prints as the source prints them; decimal commas are verbatim.
- the source prints no thread tolerance and no finish line — the makings block (Steel: 4.6, 5.8, 8.8) is the page's only material authority.
Materials
- The source makings block prints Steel: 4.6, 5.8, 8.8 with a literal "-" for Stainless, Plastic, Non Ferrous and Thread — so this page claims steel property classes only, and coating state (sleeper screws are commonly supplied galvanized for outdoor track duty) is a quotation confirmation, not a page claim. For rail work the practical choice is set by the track system specification: match the property class and form letter the track design calls for rather than substituting by diameter — form A and form B heads seat against different shoulders/clips, and a wrong-form screw does not fasten the rail even when the thread bites. State form, d1, l1, class, coating and quantity per size on the RFQ; depots replacing corroded screws should pull one failed part and match d2 and r1 against the grid before ordering by length alone.
Ordering & documentation
Documents
Shipments of DIN 5914 Sleeper Screws (Form A / Form B, d1 22 – 26) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 5914 Sleeper Screws (Form A / Form B, d1 22 – 26) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 5914 Sleeper Screws (Form A / Form B, d1 22 – 26)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 5914 sleeper screws (form a / form b, d1 22 – 26) is 10,000 pieces (applies to the standard sizes and finishes for din 5914 sleeper screws (form a / form b, d1 22 – 26); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 5914 sleeper screws (form a / form b, d1 22 – 26) run 3–7 days. Quantities or variants of din 5914 sleeper screws (form a / form b, d1 22 – 26) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 5914 Sleeper Screws (Form A / Form B, d1 22 – 26) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 5914 sleeper screws (form a / form b, d1 22 – 26) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What is the difference between form A and form B sleeper screws in the printed grid?
The "From" column splits the series into two head forms, and the grid makes the difference concrete: at d1 22 the form A row prints d2 42 and r1 32 while the form B rows print d2 50 and r1 40, and at d1 26 only form B rows exist (d2 54, r1 40). The head form determines what the screw seats against in the sleeper system — shoulder and clip hardware are designed for one form — so the two are not interchangeable even where a diameter exists in both. Match the form letter from the track system documentation or from a removed part (measure head diameter across the print), then pick d1 and l1 from the printed rows.
Why does the table have columns the legend does not explain?
The source page legend covers only five attributes (k, d2, D1, d3, r1) while the grid prints seventeen columns — d4, f2, f3, f4, l2, l3, z, h and t appear with no legend entry, as captured. This page transcribes them positionally verbatim and flags the gap instead of guessing meanings: for engineering use, treat the five legended attributes plus d1, l1 and the weight column as the authoritative reads, and take the unlegended columns as source-faithful reference values. If your sleeper system documentation defines those columns (the standard document is the authority the source page compresses), verify against it — the standard text, not this page, is what those letters mean.
What should an RFQ for DIN 5914 sleeper screws state?
Form letter (A or B), shank diameter d1 (22/24/26), length l1 from the printed ladder or your system drawing, property class (4.6, 5.8 or 8.8 as printed), coating (the source prints none — galvanizing for track duty is a quotation confirmation), any track-system acceptance requirement, and quantity per size. Rail maintenance buyers should also state the sleeper type or the removed-part head measurements (d2/r1) when the form is uncertain — that one measurement prevents the most common wrong-part delivery on mixed track.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 5914 Sleeper Screws (Form A / Form B, d1 22 – 26) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 5914 Sleeper Screws (Form A / Form B, d1 22 – 26)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support