DIN 909 Hexagon Head Pipe Plugs with Conical Pipe Thread
DIN 909 hexagon head pipe plugs with tapered (conical) pipe thread — metal-to-metal sealing plugs in metric tapered thread per DIN 158 and Whitworth taper per DIN 3858 (R sizes), tabulated M10x1 to M60x2 / R1/8 to R1 1/2 with head dimensions, tolerance bands and per-size weight.
Last updated: 2026-11
Specifications
DIN 909 is the metal-to-metal-sealing member of the pipe-plug pair: its tapered thread (metric taper per DIN 158, or Whitworth taper per DIN 3858 whose R sizes it prints side by side) wedges into the matching tapped hole and seals at the thread flanks, unlike the parallel-thread DIN 910 plug that needs a soft seal. The hexagon head takes a standard wrench, which is why these plugs show up on gearboxes, hydraulic reservoirs, valve bodies and cast housings generally — anywhere a machined tapered hole needs a reusable, wrench-tightened closure. The collected grid covers M10x1 through M60x2 and R1/8 through R1 1/2 (24 printed size rows), with thread length b, head diameter d2, wrench dimensions, a per-size tolerance band (h13/h14/h15) and a weight column per 1000 pieces. Reading notes before engineering use: the two thread prints share the same rows — a metric row and an R-size row at the same head size are interchangeable in the plug geometry but NOT in the mating hole (a tapped DIN 158 hole does not accept an R plug); several cells print '-' where that thread variant has no size at that head; and the source prints no material or finish line at all — plugs come in free-cutting steel by default in the trade, but this page makes no material claim beyond what is printed. The source page title itself prints "whit conical pipe thread" (sic) — carried as printed.
| Standard / scope | DIN 909 hexagon head pipe plugs, conical (tapered) pipe thread — source title as printed: "Hexagon head pipe plug whit conical pipe thread" (sic) |
|---|---|
| Threads (d1, two prints) | metric tapered male thread per DIN 158 in two pitch variants (e.g. M10x1 / M12x1,5 / ... / M60x2) and Whitworth taper per DIN 3858: R1/8, R1/4, R3/8, R1/2, R3/4, R1, R1 1/4, R1 1/2 |
| Size rows tabulated | 24 printed rows from M10x1/R1/8 up to M56x2/M60x2; several rows carry only one thread variant (the others print "-") |
| Tolerance bands | per-size tolerance band carried by the grid: h13 at the smallest sizes, h14 across the middle band, h15 from M36/R1 1/4 up (as printed) |
| Weight column | weight per 1000 pcs tabulated per size row: 5,72 (M10x1/R1/8) up to 296 (M60x2), decimal commas verbatim |
| Not tabulated | No material, finish, or equivalents line printed on the source page — no material claim is made beyond the printed grid |
| d1 - metric DIN 158 (variant A) | d1 - metric DIN 158 (variant B) | d1 - Whitworth DIN 3858 | b | d2 | e | l | s (1) | s (2) | t | weight kg/1000pcs |
|---|---|---|---|---|---|---|---|---|---|---|
| M10x1 | - | R1/8 | 8 | - | 7,66 | 12,5 | 7 | h13 | - | 5,72 |
| M12x1,5 | - | - | 10 | - | 7,66 | 15 | 7 | h13 | - | 9,1 |
| - | - | R1/4 | 10 | - | 9,76 | 15 | 9 | h14 | - | 12 |
| M14x1,5 | - | - | 10 | - | 9,76 | 15 | 9 | h14 | - | 13,2 |
| M16x1,5 | - | - | 10 | - | 10,89 | 16 | 10 | h14 | - | 17,9 |
| - | - | R3/8 | 10 | - | 10,89 | 16 | 10 | h14 | - | 19,4 |
| M18x1,5 | - | - | 10 | - | 10,89 | 16 | 10 | h14 | - | 21,9 |
| M20x1,5 | - | - | 10 | 12 | 14,2 | 17 | 13 | h14 | 6 | 25 |
| - | - | R1/2 | 10 | 12 | 14,2 | 17 | 13 | h14 | 6 | 27,2 |
| M22x1,5 | - | - | 10 | 14 | 14,2 | 17 | 13 | h14 | 6 | 29 |
| M24x1,5 | - | - | 12 | 16 | 18,72 | 20 | 17 | h14 | 7 | 43,8 |
| (M26x1,5) | - | - | 12 | 16 | 18,72 | 20 | 17 | h14 | 7 | 50,9 |
| - | M27x2 | R3/4 | 12 | 16 | 18,72 | 20 | 17 | h14 | 7 | 51,8 |
| M30x1,5 | M30x2 | - | 12 | 20 | 20,88 | 22 | 19 | h14 | 7 | 69,4 |
| - | M33x2 | R1 | 12 | 23 | 20,88 | 22 | 19 | h14 | 7 | 76,2 |
| M36x1,5 | M36x2 | - | 15 | 26 | 26,17 | 27 | 24 | h15 | 10 | 118 |
| (M38x1,5) | - | - | 15 | 28 | 26,17 | 27 | 24 | h15 | 10 | 125 |
| - | M39x2 | - | 15 | 28 | 26,17 | 27 | 24 | h15 | 10 | 130 |
| M42x1,5 | M42x2 | R1 1/4 | 18 | 32 | 26,17 | 30 | 24 | h15 | 13 | 151 |
| M45x1,5 | M45x2 | - | 18 | 35 | 26,17 | 30 | 24 | h15 | 13 | 163 |
| M48x1,5 | M48x2 | R1 1/2 | 20 | 38 | 32,95 | 35 | 30 | h15 | 15 | 230 |
| M52x1,5 | M52x2 | - | 20 | 42 | 32,95 | 35 | 30 | h15 | 15 | 249 |
| - | M56x2 | - | 22 | 46 | 32,95 | 37 | 30 | h15 | 17 | 275 |
| - | M60x2 | - | 22 | 50 | 32,95 | 37 | 30 | h15 | 17 | 296 |
- the source's sub-header band (js 16 / +10 / min. / js 16 / tolerance / 0-1) aligns ambiguously against the top header row in the captured DOM — cells above are transcribed positionally verbatim with column labels from the top header row; the band is NOT re-assigned by interpretation.
- the tolerance band (h13/h14/h15) is carried by rowSpan in the source grid and expanded onto each covered row; the '-' cells are the source's own no-variant or no-value prints, never zeros.
- the '(M26x1,5)' and '(M38x1,5)' parentheses are the source's non-preferred-size marker, kept verbatim.
- the metric print has two pitch variants (A/B) per head size and the Whitworth print one R size; a row can carry up to three thread prints at the same head geometry.
Materials
- The source page prints no makings line — no steel grade, no stainless or finish options — so this page makes no material claim beyond the geometry grid. In trade practice DIN 909 plugs are most commonly supplied in free-cutting steel with or without surface protection, and stainless (A2/A4) versions are widely stocked for hydraulic and potable-water duties, but both are quotation confirmations here, not claims read off the source. State the thread print you need (metric DIN 158 pitch variant or Whitworth R size — they tap different holes), the material and any certificate requirement explicitly, and quantity per size.
Ordering & documentation
Documents
Shipments of DIN 909 Hexagon Head Pipe Plugs with Conical Pipe Thread are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 909 Hexagon Head Pipe Plugs with Conical Pipe Thread orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 909 Hexagon Head Pipe Plugs with Conical Pipe Thread), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 909 hexagon head pipe plugs with conical pipe thread is 10,000 pieces (applies to the standard sizes and finishes for din 909 hexagon head pipe plugs with conical pipe thread; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 909 hexagon head pipe plugs with conical pipe thread run 3–7 days. Quantities or variants of din 909 hexagon head pipe plugs with conical pipe thread outside the standard range are confirmed at quotation.
Storage & shipping
DIN 909 Hexagon Head Pipe Plugs with Conical Pipe Thread are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 909 hexagon head pipe plugs with conical pipe thread dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 909 vs DIN 910 — which plug seals in my hole?
It is decided by the hole, not by preference. DIN 909 has a tapered thread and seals metal-to-metal at the thread flanks — it belongs in a hole tapped with the matching taper (metric taper per DIN 158, or an R-size Whitworth taper per DIN 3858). DIN 910 has a parallel thread and relies on a soft sealing washer or compound — it belongs in a parallel-tapped hole. The two are not interchangeable: a taper plug in a parallel hole bottoms out without sealing, and a parallel plug in a taper hole seats only at the first threads and leaks. The grid prints both thread families in one table because they share head geometry, not because the plugs swap.
Why does the table print two metric columns and one R column per row?
The DIN 158 metric taper exists in two pitch variants (for example M30x1,5 and M30x2 both tabulated), while the Whitworth print lists one R size per head size — so a row can carry up to three thread prints, with "-" where a variant does not exist. Pick the column your hole was tapped for; the head dimensions (d2, wrench size, tolerance band) are shared across the variants in the same row, which is why the source prints them together. Do not let a supplier substitute the other print: the thread form is different even when the head is identical.
What does the h13/h14/h15 band in the table mean?
The band is the source's per-size tolerance print on the wrench-critical dimension, stepping coarser as the sizes grow (h13 at the smallest sizes, h14 across the middle, h15 from the large sizes up). For a plug this matters mostly for gauge and interchange checks rather than sealing — the seal happens at the tapered thread, not at the head. If your inspection plan references the head dimension, quote the band letter with the size so the supplier supplies to the same tolerance band the table prints.
What should an RFQ for DIN 909 plugs state?
The thread print exactly as your hole was tapped (metric DIN 158 pitch variant, e.g. M20x1,5, or the Whitworth R size, e.g. R1/2 — never just "M20 plug"), material and any protective finish (the source prints none — confirm at quotation), certificate requirement if the medium demands it, and quantity per size. The tabulated weight column gives you a shipping-weight estimate per 1000 pieces. Sizes or thread prints not in the grid are confirmed at quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 909 Hexagon Head Pipe Plugs with Conical Pipe Thread inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 909 Hexagon Head Pipe Plugs with Conical Pipe Thread
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support