ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in)
ISO 263:1973 — the general plan and size selection for ISO inch screw threads: the inch-series plan and designation scheme for non-pipe threads across 0.06 to 6 in, the document that pairs with ISO 68-2 (basic profile) as the inch counterpart to the ISO metric 261 plan.
Last updated: 2026-11
Specifications
ISO 263 is the inch-series entry point of the ISO thread system: the general plan that fixes which diameter-pitch combinations exist for unified-style inch threads and how they are designated. The collected index summarizes its scope in one line — "Inch series plan and designations (non-pipe threads)" over the 0.06 to 6 in range — and positions it by the same structure as the metric side: ISO 68-2 defines the inch basic profile, ISO 263 selects the sizes, and ISO 725 (basic dimensions) and ISO 5864 (allowances and tolerances) fill in the numbers against that selection. The "non-pipe threads" boundary in the scope matters in practice: pipe threads run on their own standards, so a designation that comes out of this plan is a fastener-style thread, not a pressure-tight pipe joint. On a drawing or a sourcing line, citing ISO 263 answers the question the plan exists for — which inch thread series and size is a standard selection, before anyone looks up its dimensions or tolerance class. The tabulated edition is 1973; ISO documents revise, so confirm currency with ISO before designing to a summary.
| Standard | ISO 263:1973 — ISO inch screw threads — General plan & selection (0.06–6 in) |
|---|---|
| Scope (as tabulated) | Inch series plan and designations (non-pipe threads) |
| Related documents | ISO 68-2 (inch basic profile) and ISO 263 form the inch counterpart to the metric ISO 68-1/261 pair; basic dimensions per ISO 725, allowances and tolerances per ISO 5864 |
| Dimension / tolerance data | Not tabulated by the collected index — dimensions and allowance classes are the scope of ISO 725 and ISO 5864 respectively |
Materials
- Not applicable — reference scope page; the standard is form-and-designation data and is material-independent
Ordering & documentation
Documents
Shipments of ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for iso 263 — iso inch screw threads: general plan and selection (0.06–6 in) is 10,000 pieces (applies to the standard sizes and finishes for iso 263 — iso inch screw threads: general plan and selection (0.06–6 in); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 263 — iso inch screw threads: general plan and selection (0.06–6 in) run 3–7 days. Quantities or variants of iso 263 — iso inch screw threads: general plan and selection (0.06–6 in) outside the standard range are confirmed at quotation.
Storage & shipping
ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 263 — iso inch screw threads: general plan and selection (0.06–6 in) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How does ISO 263 relate to the metric ISO 261, and when would a buyer cite it instead?
The two documents play the same role in their respective unit worlds: ISO 261 is the general plan and size selection for metric M threads, ISO 263 the equivalent plan and designation scheme for ISO inch threads (0.06 to 6 in, non-pipe). A buyer cites ISO 263 when the sourcing line is inch-based and the thread must be a standard selection rather than a special — the plan is what makes an inch thread callout reproducible between drawing, supplier and gauge. Its companions stay the inch-family documents: ISO 725 for basic dimensions and ISO 5864 for the allowances and tolerances that give the selected size its fit class. What this page cannot supply is the dimension or tolerance ladder itself — those live in the companion documents and are RFQ/scope questions here.
What is the MOQ and lead time for threaded parts ordered against an ISO inch thread designation?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity, size mix and any tooling items at quotation.
What is the MOQ and lead time for ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in) state?
State the full designation (ISO 263:1973), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ISO 263 — ISO Inch Screw Threads: General Plan and Selection (0.06–6 in)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support