ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan
ISO 2902:1977 — the general plan for ISO metric trapezoidal screw threads (Tr): the series of diameter/pitch combinations the Tr lead-screw family is selected from, profile fixed by ISO 2901 and toleranced by ISO 2903.
Last updated: 2026-11
Specifications
ISO 2902 is the selection document of the trapezoidal Tr family — the metric counterpart to Acme for leadscrews, valve stems and other screw-driven linear motion. The collected index summarizes its scope as "Series of diameter/pitch combinations for trapezoidal threads": where the M-family plan (ISO 261) selects fastener threads, ISO 2902 selects the coarser, deeper Tr threads, and unlike the M series a Tr designation is diameter-pitch in one callout because lead-screw applications pick pitch for mechanical advantage rather than taking a default coarse. The family reads as a set: ISO 2901 defines the basic and maximum material profiles of the 30° trapezoidal form, ISO 2902 selects the diameter/pitch combinations, ISO 2903 carries the tolerance system, and ISO 2904 tabulates basic dimensions. The boundary the index prints for the family belongs to 2903 but shapes the whole set — trapezoidal threads serve lead screws and special axial-displacement applications — so selections here are power-transmission choices, not fastener threads, and mixing a Tr callout into a bolted joint conversation is a category error. The tabulated edition is 1977; confirm currency with ISO before designing to a summary.
| Standard | ISO 2902:1977 — ISO metric trapezoidal screw threads — General plan |
|---|---|
| Scope (as tabulated) | Series of diameter/pitch combinations for trapezoidal threads |
| Related documents | Profiles ISO 2901; tolerances ISO 2903; basic dimensions ISO 2904 — inch power-thread counterpart: Acme (ASME B1.5) |
| Selection rule | Tr designations are diameter-pitch callouts (pitch chosen per application), unlike the M series where a coarse-pitch default exists |
| Dimension / tolerance tables | Not tabulated by the collected index — state Tr size and pitch at RFQ |
Materials
- Not applicable — reference scope page; Tr parts typically pair steel screws with bronze or polymer nuts by application, decided at RFQ
Ordering & documentation
Documents
Shipments of ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for iso 2902 — iso metric trapezoidal screw threads: general plan is 10,000 pieces (applies to the standard sizes and finishes for iso 2902 — iso metric trapezoidal screw threads: general plan; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 2902 — iso metric trapezoidal screw threads: general plan run 3–7 days. Quantities or variants of iso 2902 — iso metric trapezoidal screw threads: general plan outside the standard range are confirmed at quotation.
Storage & shipping
ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 2902 — iso metric trapezoidal screw threads: general plan dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why does the Tr plan (ISO 2902) require an explicit pitch in every designation when metric fastener threads do not?
Fastener threads under ISO 261 have a socially agreed default — the coarse pitch — so "M10" alone is a complete selection; fine pitches are the exception that must be written out. Lead-screw threads have no such default because pitch is a design variable, not a convention: a Tr designation exists to set travel per revolution, thrust capacity and self-locking behavior, and the same 40 mm diameter is a different engineering choice at each available pitch. ISO 2902 therefore enumerates the diameter/pitch combinations that are standard selections and nothing else — pick a combination from the plan and every downstream document (ISO 2903 tolerance classes, ISO 2904 basic dimensions) applies to it directly. Practically, that means a Tr RFQ needs both numbers plus the tolerance class from ISO 2903; a diameter alone is not a selection the plan can complete.
What is the MOQ and lead time for trapezoidal (Tr) threaded parts and nuts?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity, size mix and any tooling items at quotation.
What is the MOQ and lead time for ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan state?
State the full designation (ISO 2902:1977), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ISO 2902 — ISO Metric Trapezoidal Screw Threads: General Plan
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support