ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm)

ISO 1501:2009 — the single-document standard for ISO miniature screw threads: profiles, diameter-pitch sets, dimensions and tolerances for the 0.3 to 1.4 mm range, where the M-series documents consolidate into one specification.

Last updated: 2026-11

Request a Quote

ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm) in an industrial setting
Illustrative image redrawn from real ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm) product references — not a photograph of stocked items.

Specifications

ISO 1501 is the complete standard for the smallest metric threads — the 0.3 to 1.4 mm range used in instruments, optics, watches, electronics and medical devices. The collected index summarizes its scope as "Profiles, diameter-pitch sets, dimensions and tolerances for 0.3–1.4 mm miniature threads", and that four-in-one list is the notable fact about the document: it does in one place what the full-size M thread world spreads across four (profile in ISO 68-1, plan in ISO 261, dimensions in ISO 724, tolerances in ISO 965). The consolidation is a consequence of scale — miniature threads are a specialized domain with their own size ladder and finer inspection practice, and a single self-contained document keeps the whole system in one citation. For sourcing, the practical boundary is the range: at M1.4 and below a thread is an ISO 1501 miniature thread with its own designations and tolerance practice; from M1.6 upward the ordinary M-series documents apply (ISO 262 selects M1 as a preferred size, so the exact crossover at the small end follows the standard's own size sets). The tabulated edition is 2009; confirm currency with ISO before designing to a summary.

Standard ISO 1501:2009 — ISO miniature screw threads
Scope (as tabulated) Profiles, diameter-pitch sets, dimensions and tolerances for 0.3–1.4 mm miniature threads
Related documents Counterpart system for ordinary M threads: ISO 68-1 (profile) + ISO 261 (plan) + ISO 724 (dimensions) + ISO 965 (tolerances)
Single-document scope Profile, selection, dimensions and tolerances consolidated — unlike the four-document M-series architecture
Dimension / tolerance tables Not tabulated by the collected index — state the miniature size and application at RFQ

Materials

  • Not applicable — reference scope page; miniature threaded parts run in stainless and specialty alloys per application, decided at RFQ

Ordering & documentation

Documents

Shipments of ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 1501 — iso miniature screw threads (0.3–1.4 mm) is 10,000 pieces (applies to the standard sizes and finishes for iso 1501 — iso miniature screw threads (0.3–1.4 mm); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 1501 — iso miniature screw threads (0.3–1.4 mm) run 3–7 days. Quantities or variants of iso 1501 — iso miniature screw threads (0.3–1.4 mm) outside the standard range are confirmed at quotation.

Storage & shipping

ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 1501 — iso miniature screw threads (0.3–1.4 mm) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why do miniature threads have their own standard (ISO 1501) instead of using the M-series documents at small sizes?

Because the M-series architecture assumes a manufacturing and inspection environment that does not scale down cleanly: four separate documents (profile, plan, dimensions, tolerances) make sense for general fastener production, but the 0.3–1.4 mm range is a specialized world with its own diameter-pitch sets, proportioned thread form and much finer tolerance and gauging practice. ISO 1501 consolidates all four layers into one self-contained standard so that a miniature thread callout is specified, dimensioned and toleranced against a single document — no cross-referencing four citations for a screw smaller than a matchstick. For buyers the practical routing rule is by size: at and below the miniature range, ISO 1501 is the governing citation and M-series documents do not apply; from the ordinary small sizes upward, the standard M documents take over. Components at this scale are application-specific (instruments, optics, medical), so state the device context and quantity at RFQ.

What is the MOQ and lead time for miniature threaded parts and inserts?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity, size mix and any tooling items at quotation.

What is the MOQ and lead time for ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm) state?

State the full designation (ISO 1501:2009), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 1501 — ISO Miniature Screw Threads (0.3–1.4 mm)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.