ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances

ISO 2903:1993 — the tolerance system for ISO metric trapezoidal (Tr) screw threads, serving lead-screw and axial-displacement applications; the Tr-family counterpart to the metric M tolerance system ISO 965.

Last updated: 2026-11

Request a Quote

ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances in an industrial setting
Illustrative image redrawn from real ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances product references — not a photograph of stocked items.

Specifications

ISO 2903 is the fit layer of the trapezoidal family: once ISO 2902 has selected a diameter/pitch combination and ISO 2901 fixed the form, ISO 2903 defines the tolerance grades and classes that determine how much clearance a Tr nut runs on its screw. The collected index summarizes it as "Tolerance system for Tr threads (lead screws & special axial displacement not covered)" — a scope line worth reading closely, because it both names the primary application (lead screws) and flags the exclusion: applications classed as special axial displacement sit outside this tolerance system, so a leadscrew spec that falls into that special category cannot assume ISO 2903 covers its fit. For the standard lead-screw case, the document plays exactly the role ISO 965 plays for M threads — a structured grade system instead of a single arbitrary fit — which is why a Tr RFQ is incomplete without a class from this document: the ISO 2904 basic dimensions say what the thread is, ISO 2903 says what it is allowed to measure. The tabulated edition is 1993; confirm currency with ISO before designing to a summary.

Standard ISO 2903:1993 — ISO metric trapezoidal screw threads — Tolerances
Scope (as tabulated) Tolerance system for Tr threads (lead screws & special axial displacement not covered)
Related documents Profiles ISO 2901; size plan ISO 2902; basic dimensions ISO 2904
Boundary Special axial-displacement applications are excluded from this tolerance system — confirm application class before assuming coverage
Tolerance class tables Not tabulated by the collected index — state Tr size, pitch and required class at RFQ

Materials

  • Not applicable — reference scope page; tolerance data is material-independent

Ordering & documentation

Documents

Shipments of ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 2903 — iso metric trapezoidal screw threads: tolerances is 10,000 pieces (applies to the standard sizes and finishes for iso 2903 — iso metric trapezoidal screw threads: tolerances; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 2903 — iso metric trapezoidal screw threads: tolerances run 3–7 days. Quantities or variants of iso 2903 — iso metric trapezoidal screw threads: tolerances outside the standard range are confirmed at quotation.

Storage & shipping

ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 2903 — iso metric trapezoidal screw threads: tolerances dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does the "special axial displacement not covered" boundary on ISO 2903 mean for a leadscrew specification?

The collected scope line divides trapezoidal applications into two groups: lead screws — the standard case of a rotating screw driving a nut axially — which ISO 2903 tolerances, and "special axial displacement" applications, which it explicitly does not. The distinction matters at specification time because it decides whether an ISO 2903 class is a complete fit definition: for a standard leadscrew, naming the size, pitch and an ISO 2903 class gives supplier and inspector everything they need; for an application in the special-displacement category, the tolerance system on this page is not sufficient authority and the fit requirements must be engineered and stated separately at RFQ. Since the collected index does not enumerate the special category, the safe practice is application disclosure — describe how the screw and nut are driven and loaded, and let the fit requirements be confirmed against the right document rather than assumed covered.

What is the MOQ and lead time for trapezoidal leadscrew assemblies and mating nuts?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity, size mix and any tooling items at quotation.

What is the MOQ and lead time for ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances state?

State the full designation (ISO 2903:1993), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 2903 — ISO Metric Trapezoidal Screw Threads: Tolerances
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.