ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances

ISO 5864:1993 — the system of allowances and tolerances for ISO inch screw threads across the standard inch series (0.06–6 in): the inch counterpart to the metric ISO 965, turning ISO 725 basic dimensions into acceptance limits.

Last updated: 2026-11

Request a Quote

ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances in an industrial setting
Illustrative image redrawn from real ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances product references — not a photograph of stocked items.

Specifications

ISO 5864 is the fit layer of the ISO inch thread system — the document that says how much material to leave and how much variation to allow. The collected index summarizes it as "System of allowances/tolerances for standard inch thread series (0.06–6 in)", matching the ISO 263 plan range exactly: the inch system reads profile (ISO 68-2) → size plan (ISO 263) → basic dimensions (ISO 725) → allowances and tolerances (ISO 5864), a four-document architecture that mirrors the metric M system (68-1 → 261 → 724 → 965). The allowance half of the scope is the concept the metric system folds differently: an allowance is a deliberate offset applied before tolerance — external threads cut below basic so a nut engages with running clearance, internal threads above it — and the tolerance then bounds the manufacturing variation around that offset. A complete inch thread specification therefore needs the size from the ISO 263 plan plus a class from ISO 5864; the ISO 725 basics alone give geometry, not fit, exactly as ISO 724 alone does on the metric side. The tabulated edition is 1993; confirm currency with ISO before designing to a summary.

Standard ISO 5864:1993 — ISO inch screw threads — Allowances & tolerances
Scope (as tabulated) System of allowances/tolerances for standard inch thread series (0.06–6 in)
Related documents Profile ISO 68-2; size plan ISO 263; basic dimensions ISO 725 — metric counterpart: ISO 965 tolerance system
Allowance vs tolerance Allowance = deliberate offset from basic (fit intent); tolerance = permitted variation around the offset (process control) — both defined by this document
Class tables Not tabulated by the collected index — state inch size, series and tolerance class at RFQ

Materials

  • Not applicable — reference scope page; tolerance data is material-independent

Ordering & documentation

Documents

Shipments of ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 5864 — iso inch screw threads: allowances and tolerances is 10,000 pieces (applies to the standard sizes and finishes for iso 5864 — iso inch screw threads: allowances and tolerances; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 5864 — iso inch screw threads: allowances and tolerances run 3–7 days. Quantities or variants of iso 5864 — iso inch screw threads: allowances and tolerances outside the standard range are confirmed at quotation.

Storage & shipping

ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 5864 — iso inch screw threads: allowances and tolerances dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What is an "allowance" on ISO 5864, and how is it different from a tolerance?

The two words in the document title do different jobs. The allowance is the intentional offset from the basic dimension that creates the fit: an external inch thread is cut below its ISO 725 basic values by the allowance so the mating nut assembles with designed clearance, while an internal thread sits above basic for the same reason. The tolerance is what bounds manufacturing scatter — the permitted variation around that already-offset target, smaller for precision classes and wider for commercial ones. Put together, allowance plus tolerance produce the max/min acceptance limits a gauge or mic actually checks. This is why a complete inch thread callout names both the size (from the ISO 263 plan) and an ISO 5864 class: without the class there is no allowance decision and no acceptance limits, only bare geometry. The structure is the inch twin of metric practice, where ISO 965 plays the same role over ISO 724 basics — a team that understands one system can read the other by document-number substitution.

What is the MOQ and lead time for inch-series threaded parts supplied to an ISO 5864 tolerance class?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity, size mix and any tooling items at quotation.

What is the MOQ and lead time for ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances state?

State the full designation (ISO 5864:1993), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 5864 — ISO Inch Screw Threads: Allowances and Tolerances
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.