ISO 725 — ISO Inch Screw Threads: Basic Dimensions
ISO 725:2009 — basic dimensions for ISO inch screw threads, the tabulated values the inch plan (ISO 263) generates against the ISO 68-2 basic profile; the inch counterpart to ISO 724 on the metric side.
Last updated: 2026-11
Specifications
ISO 725 is where the inch-series plan turns into numbers. The collected index summarizes it as "Basic dimensions for ISO inch threads (per ISO 68-2/263)" — a scope line that encodes the whole chain: the ISO 68-2 profile fixes the thread form, the ISO 263 plan selects the size-pitch combinations, and ISO 725 tabulates the resulting basic dimensions for each of them. "Basic" is the operative word: these are the theoretical exact values the form produces, before any allowance or tolerance is applied — the same distinction as the metric side, where ISO 724 (basic dimensions) and the ISO 965 tolerance system are separate documents. In the inch world the tolerance layer is ISO 5864, so a complete inch thread callout routes profile → plan → basic dimensions → tolerances as 68-2 → 263 → 725 → 5864. When a drawing gives an inch thread size, the major/pitch/minor values a shop checks against are the ISO 725 figures modified by the ISO 5864 class; citing ISO 725 alone means the uncompensated basic form. The tabulated edition is 2009; confirm currency with ISO before designing to a summary.
| Standard | ISO 725:2009 — ISO inch screw threads — Basic dimensions |
|---|---|
| Scope (as tabulated) | Basic dimensions for ISO inch threads (per ISO 68-2/263) |
| Related documents | Profile ISO 68-2; size plan ISO 263; allowances and tolerances ISO 5864 — metric counterpart ISO 724 |
| Basic vs tolerance values | "Basic" = theoretical exact form values before allowance/tolerance; the fit layer is ISO 5864, not this document |
| Dimension tables | Not tabulated by the collected index — the ladder itself is the scope of the standard; state size and series at RFQ |
Materials
- Not applicable — reference scope page; the standard is geometric data and is material-independent
Ordering & documentation
Documents
Shipments of ISO 725 — ISO Inch Screw Threads: Basic Dimensions are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 725 — ISO Inch Screw Threads: Basic Dimensions orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 725 — ISO Inch Screw Threads: Basic Dimensions), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for iso 725 — iso inch screw threads: basic dimensions is 10,000 pieces (applies to the standard sizes and finishes for iso 725 — iso inch screw threads: basic dimensions; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 725 — iso inch screw threads: basic dimensions run 3–7 days. Quantities or variants of iso 725 — iso inch screw threads: basic dimensions outside the standard range are confirmed at quotation.
Storage & shipping
ISO 725 — ISO Inch Screw Threads: Basic Dimensions are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 725 — iso inch screw threads: basic dimensions dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What does "basic dimensions" mean on ISO 725, and why is it a separate document from the tolerances?
Basic dimensions are the theoretical exact values generated by the thread form — the major, pitch and minor diameters the profile mathematics produce for each selected size, with no allowance for fit and no manufacturing tolerance. ISO keeps them separate so the geometry is defined once and the fit systems reference it: on the inch side, ISO 5864 applies allowances and tolerances to the ISO 725 basics to produce the max/min limits a shop actually inspects to (externally threaded parts cut to the basic minus allowance, internally threaded parts to basic plus). This mirrors the metric structure exactly — ISO 724 basics, ISO 965 tolerances — so a team working both unit worlds sees the same architecture with different document numbers. For sourcing: a callout that names only ISO 725 is incomplete for inspection; the fit class from ISO 5864 is what turns the basics into acceptance limits, so state both the size and the tolerance class at RFQ.
What is the MOQ and lead time for inch-series threaded parts and gauging referenced by this standard?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity, size mix and any tooling items at quotation.
What is the MOQ and lead time for ISO 725 — ISO Inch Screw Threads: Basic Dimensions?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 725 — ISO Inch Screw Threads: Basic Dimensions state?
State the full designation (ISO 725:2009), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 725 — ISO Inch Screw Threads: Basic Dimensions inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ISO 725 — ISO Inch Screw Threads: Basic Dimensions
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support